Playing Compact Discs - Pioneer KEH-M7300 Owner's Manual

Playing Compact Discs
RR A RA Se een He
(1) Track Number Search/Fast Forward, Reverse
(2) Disc Number search
OVW FADER
wa RPT/RDM
RINTICDINT =D RPT
<= @) @ ©
q
KEH-M7300
Display
(4) Highlight Scan
(5) Music Repeat/Random Play/Disc Repeat
(©) ITP (Instant Track Program)
@) Program Clear
sy Music Repeat/Disc Repeat
u) Random Play
W Highlight Scan
@ Track Number
® Disc Number
Press button @ to change the display to the Multi-Play CD
player mode and to begin disc play.
Each press of button @ changes the mode as follows:
Multi-Play CD player — Tape — tuner — OFF
Use the Disc Number Search function to select a disc.
Select the desired disc by pressing one of the buttons in Bank
@. The number of the disc selected appears at position ® on
the display.
¢ Display © indicates whether the magazine is loaded or
empty.
e If the number at position @ on the display does not change
when you press a button in Bank @, it means that there is no
disc loaded in that tray.
Use Track Number search to select a track.
Confirm that Track Number is shown at Position @ on the dis-
play.
If not, press the (+) and (-) sides of button @ at the same time.
Press the (+) side of button @ to increase the number at Posi-
tion @, or the (-) side to decrease the number. Holding either
side of button @ down changes the track number at high
speed.
Adjust volume and tone (see page 6).
[5] To stop disc play, press button @.
At another press, the normal play resumes from about where it
stopped.
e If you stopped operating a Multi-Play CD Player CDX-M100 in
the middle of music and then restarted, the player resumes
playing from the very beginning of the selection with which
you stopped.
17
ot:
®
=