Playing A Dvd With Surround Sound - Pioneer VSA-E08 Operating Instructions Manual

5 5 5 5 5 Playing a DVD with Surround Sound

1 Turn on the Amplifier, your TV, and the DVD player.
2 Press the STANDARD button on the front panel for the basic surround
sound setting.
You can also press the remote control AMP button and then press the STANDARD button on that
Amplifier MAIN screen.
3 Press the DVD/LD button on the remote control.
You should see "DVD/LD" in the display on the amplifier.
4 Play a DVD.
6 6 6 6 6 For Better Surround Sound
1 Go through the entire "system setup" procedures as outlined on pages
30-39 of this instruction manual.
If you don't hook up any other components with digital audio or do so following the default settings of
the amplifier (see p.14) you won't have to assign any more digital inputs, but many other adjustments
will improve the sound tremendously.
2 Experiment with the different sound settings offered with the 2/DTS/
MPEG and DSP buttons.
For more information see p.41-45.
3 As mentioned above you should go through the "speaker setup" instructions
on pages 30-39 to set up your speakers properly. If you don't do this you, at
least, need to make sure the CENTER channel is turned off if you don't have a
center speaker. Use the instructions on pages 30-33 to get the display below
on your remote control.
If you don't have a center speaker press the CENTER button until the box
appears empty. Then press the SETUP OK button to EXIT and go back to the
System Setup screen.
VI
En
Center
(not hooked up)
Speaker Setting
Front
L
+
Surround
L
+
Surround back (not hooked up)
Sub
Front
woofer R
BACK
+
THX
FREE
Surround
+
SETUP
OK
Quick Start Guide
R