Other (User) Settings - Panasonic CY-VHD9401U Operating Instructions Manual

E

Other (USER) Settings

N
G
L
I
S
H
25
Video Control Setting
(DVD Changer)
After this setting is made, inserting a disc
to a connected DVD changer (CX-DH801U,
option) automatically changes to the DVD
changer mode.
Default: VTR1
Setting value: VTR1, VTR2
Button Operation Sound
Default: ON
Setting value: ON/OFF
Blue Ceiling Refl ected
Illumination Setting
Default: ON
Setting value: ON/OFF
Audio Output Level
Default: 3
Setting value: 1/2/3
Memory Clear
Default: NO
Setting value: YES/NO
66
CY-VHD9401U/L
SCREEN N USER SCREE USER
V I DEO-C O-CONT
BEEP
L I GHT HT
OUTP UTPUT T LEVEL EL
MEMORY ORY CLEAR? AR?
: SELECT ENTER:SEL
SOURCE : END
1 2
Menu Submenu
1 Press [MENU] 1 Press ["] or [#] to select
to display the menu. the item.
2 Press [%] or [$] 2 Press [ENTER].
to select "USER".
Select
VIDEO-CONT
Select
BEEP
Select
USER
Select
LIGHT
Select
OUTPUT LEVEL
Select
MEMORY CLEAR?
SCREE SCREEN N USER USER
VTR TR VTR VTR2
: SELECT ENTER: SET
3
Setting
1 Press [%] or [$] to adjust.
2 Press [ENTER] to set.
3 Press [SRC] (Source) to exit the menu.
VTR1: Connected to the VTR1-IN
VTR2: Connected to the VTR2-IN
≥ This "Video Control Setting" is required
when you connect a Panasonic DVD
changer (CX-DH801U, option).
ON: Operation sound (Beep) ON
OFF: Operation sound (Beep) OFF
ON: Blue ceiling refl eccted illumination lights on.
OFF: Blue ceiling refl eccted illumination lights off.
1: Minimum level Note:
≥ The sound may be distorted depending on the input
2: Middle level sensitivity of the external device connected. Proceed
with an adjustment only if this is the case. Normally,
3: Maximum level keep at the default setting.
YES: Default settings
NO: No memory clear
The display returns to the previous one.
Note:
≥ If no operation takes place for more than
10 seconds, the display exits the menu.
Note:
≥ Select a terminal connected to the DVD
output terminal of a Panasonic DVD changer
(CX-DH801U, option) through an RCA cord.
≥ When you connect a Panasonic DVD changer
(CX-DH801U, option), connect a video control
lead as well.
[SRC] [ENTER]
(Source) ["] [#]
[%] [$]
[MENU]
CY-VHD9401U/L
E
N
G
L
I
S
H
26
67