Panasonic CQ-VA7300N Operating Instructions Manual page 13

User Settings
E
(continued)
N
G
L
I
S
H
23
ASPECT
ASP CQ-VA7300N TILT OPEN / CLOSE
CQ-VA7300N
PRESET / DISC
EON PTY CT IN-DASH 7 INCH COLOR LCD MONITOR WITH RECEIVER
TRACK
TUNE
VOL VOL VOL MUTE MUTE MUTE
NAVIGATION PTY MONO/ST POWER
LOUD
NAVI DISP TA AF MODE MODE MENU MENU ENTER ENTER
[}] [{]
[] ] [[ ]
[MODE]
(Select/adjust)
(End) [ENTER]
[MENU]
Input/output
NAVI INPUT
Default: RGB
TV TUNER
Default: OFF
VCD-CH (VIDEO CD CHANGER)
Default: OFF
VTR 1/ 2
Default: PAL
CAMERA
Default: PAL
REAR MONITOR
Default: AUTO
Navigation Set Up
NAVI SP (Speaker selection for Navigation)
You can choose which speaker is used for
voice guidance of the car navigation system.
Default: BOTH
NAVI MUTE (Navigation mute level)
Select the mute level of this unit during the
voice guidance from the Panasonic car naviga-
tion system.
Preparation: Connect the navi mute lead.
Default: –10
NAVI VOL (Navigation volume)
Volume adjustment of the car navigation sys-
tem is executed.
Default: 30
24
CQ-VA7300N
1 2
Menu Submenu
q Press [}] or [{] to
select
" INPUT/OUTPUT " .
q Press [MENU] to
w Press [ENTER] to set.
display the menu.
w Press [[] or []] to
INPUT/OUTPUT
select "USER".
USER
SOUND
SCREEN
RDS
q Press [}] or [{] to
Note: The menu RDS can
not be selected in the select " NAVI SETUP " .
modes other than FM
w Press [ENTER] to set.
mode.
NAVI SETUP
Note: The submenu, "NAVI SETUP", is available only when "NAVI INPUT" is set to "RGB" in "INPUT/OUTPUT".
[MODE] (End)
*Making selection and adjustment on the Menu.
[MENU]
[}] [{]
[] ] [[ ]
(Select/adjust)
1
[ENTER]
¡Press [MODE] (End) to close the main menu and the setting/adjusting
menu.
¡Press [MENU] in the setting/adjusting menu to return to the main
3
Setting
menu mode.
NAVI INPUT
TV TUNER
VCD-CH
*Make a selection.
VTR 1
VTR 2
CAMERA
Note: Select PAL or NTSC in accordance with equipment to be connected.
Failure to observe this results in distorted picture.
REAR MONITOR
Note: The sound and images of TV tuner and Video CD Changer are not output
on the rear monitor.
NAVI SP
BOTH
Lch
Rch
*Make selection and adjustment.
NAVI MUTE
0 : unchanged
–10 : decrease 10 dB
NAVI VOL
q [}] and [{] buttons move the
cursor vertically.
2
w [[] and []] buttons move the
cursor horizontally.
e To set, press [ENTER] .
: set the terminal to which a Panasonic car navigation system (CN-
DV2300N/CN-DV2000EN, option) is connected. (It is recommend-
ed that a car navigation system be connected to the RGB terminal.)
If no car navigation system is connected, select RGB.
: set the terminal to which a TV tuner (CY-TN1500PEN, option) is
connected. If no TV tuner is connected, select OFF.
: set the terminal to which a Video CD (VCD) Changer is connect-
ed. If no changer is connected, select OFF.
: select PAL or NTSC in accordance with equipment connected
to the VTR 1 and VTR 2 terminals.
: select PAL or NTSC in accordance with equipment connected
to the CAMERA IN terminals.
: set image and audio to be output on the rear monitor.
Speaker selection for Navigation
: NAVI voice output from both front L ch. and front R ch.
: NAVI voice output from front L ch.
: NAVI voice output from front R ch.
Navigation mute level
–20 : decrease 20 dB
∞
– : no sound
Navigation volume
CQ-VA7300N
E
N
G
L
I
S
H
24
25