Display Window - Pioneer CDJ-500II Operating Instructions Manual

Display Window

LOOP
0
1
TRACK number display
The track number being played is displayed.
2
Time display (TIME/REMAIN)
The elapsed playback time of the track being played
(TIME) or remaining playback time of the track being
played (REMAIN) is displayed in minutes (M), seconds
(S), or frames (F).
3
MASTER TEMPO indicator
This indicator lights up when the MASTER TEMPO
function is carried out.
4
Playback tempo (TEMPO) display
The playback tempo being adjusted with the TEMPO
control knob is displayed (up to ±10% in steps of
0.1%).
Pitch indicator ( I, È, i )
5
I: The pitch of playback is decreased.
È: Normal pitch of playback
i: The pitch of playback is increased.
6
AUTO CUE indicator
This indicator lights up when the AUTO CUE function
is carried out.
1
TRACK
T I M E
REMAIN
222
RELOOP
9 8
2
M S F
333
PLAYING ADDRESS
7
Jog dial operation indicator ( 222 /
7
333 )
The indicator lights according to the rotating direction
or speed of the Jog dial.
8
Playback address display (PLAYING
ADDRESS)
The elapsed playback time or remaining playback time
of the track being played is roughly indicated with the
full-scaled bar graph.
÷ When no disc is in the
disc compartment ..................................... goes off
÷ When displaying the elapsed
playback time ............... lights up from the left side
÷ When displaying the remaining
playback time ................ goes off from the left side
÷ When the remaining playback time is
less than 30 seconds .................................... blinks
9
RELOOP indicator
This indicator lights up when loop playback is possible,
with the loop-in point (start point) and loop-out point
(end point) stored in memory.
0
LOOP indicator
This indicator lights during loop playback.
PANEL FACILITIES
3 4 5
MASTER TEMPO TEMPO
I
È
i
AUTO CUE
6
9
<DRB1223>
En