Display Window; Maintenance - Pioneer CDJ-100S Service Manual

CDJ-100S
Display Window
oes oe 8 G8 t1
L ZIP | GESSEEEEES (CUE
@ TRACK number display
Displays the current number of the track playing.
@ CUE indicator
Flashes when it is possible to input cue point, and
lights steadily after the completion of input.
@ Time display (REMAIN)
The elapsed playback time of the track being played
(when the REMAIN indicator is off) or the remaining
playback time of the track being played (when the
REMAIN indicator is on) is displayed in minutes (M)
and seconds (S), or frames (F).
@ Playback tempo display
Tempo changes made with the TEMPO control knob
are performed in 0.1% steps in the +10% range. 0 to
+10% in the +10% to -16% range is indicated in 0.1%
steps and 0.2% steps from 0 to -16%.
@ SPECIFICATIONS
1. General
POWER CONSUMPTION ........seesesesssscesesessesseseesessesssssesseeveatenens 12 W
Operating temperature
45°C - +35°C (+41 F - +95 F)
Operating MUMIGItY «0.00...
ees eseesseesesseesseessessensseees 5% - 85%
(There should be no condensation of moisture.)
8-9/16 (W) x 12-1/4 (D) x 3-3/4 (H) in.
2. Audio section
FreQUeN cy FESPONSE oo... eeecseseesesseeessesessees 4 Hz - 20 kHz (EIAJ)
48
@® MT indicator
Lights when the MASTER TEMPO function is used.
© A.CUE indicator
Lights when the AUTO CUE function is used.
@ Playback address display
The elapsed playback time or remaining playback time
of the track playing is roughly indicated with the full-
scaled bar graph.
@ When no disc is in the
WAH indicator
Lights or blinks when WAH function is active.
@® Pause indicator (11)
Blinks during pause mode.
@ ZIP indicator
Lights or blinks when ZIP function is active.
@ JET indicator
Lights during playback.
3. Accessories
NOTE:
Specifications and design are subject to possible modification
without notice.
Maintenance:
We recommend regular maintenance to ensure the sie
and proper function of this unit.
Extended service life can be expected if the unit mai-t-
tained properly.
,