Display Window - Pioneer CDJ-700S Operating Instructions Manual

BEFORE OPERATIONS: PANEL FACILITIES
! OPEN button
Press this button to open the disc compartment door.
÷ When pressed during playback, disc rotation stops
before the door opens.
@ Jog dial (+ FWD/– REV) ] P. 11
# TEMPO control knob
The playback tempo can be changed with this knob.
The center clicked position is for normal playback
tempo. If you slide the knob (down) towards you (+
side), the music tempo quickens. If the knob is away
from you (– side), the music tempo slows.

Display Window

1
LOOP
8
1 TRACK number display
Displays the current number of the track playing.
2 Time display (REMAIN)
The elapsed playback time of the track being played
or the remaining playback time of the track being
played (REMAIN) is displayed in minutes (M) and sec-
onds (S), or frames (F).
3 Playback tempo (TEMPO) display
The playback tempo adjusted with the TEMPO con-
trol knob is displayed (up to ±10% or ±16%) in steps
of 0.1%.
4 MASTER T. indicator
Lights when the MASTER TEMPO function is used.
5 AUTO CUE indicator
Lights when the AUTO CUE function is used.
8
<DRB1215>
En
TRACK REMAIN M
RELOOP
7
$ Disc compartment door
Press the OPEN button to open the door. To close
the door, push gently on the front of the door.
In order to prevent interference with outside sounds
and to enhance operation of the jog dial, the disc com-
partment door is designed with a two-point locking
mechanism. To close the door, press the door down
firmly in the center, at the position just in front of the
jog dial.
2
S F TEMPO
AUTO CUE
6
6 Playback address display
The elapsed playback time or remaining playback
time of the track playing is roughly indicated with
the full-scaled bar graph.
÷ When no disc is in the
disc compartment ................................................ off
÷ When displaying elapsed
playback time .............. lights up from the left side
÷ When displaying remaining
playback time .............. turns off from the left side
÷ When remaining playback time is
less than 30 seconds ..................................... blinks
7 RELOOP indicator
Lights when loop playback is possible. The loop-in
point (start point) and loop-out point (end point) are
stored in memory.
8 LOOP indicator
Lights during loop playback.
3
MASTER T.
4
5