Pioneer RCS-77H Operating Insructions page 85

Recording
5 Use the to move the cursor to the
recording end time on the grid.
Recording start time
Easy Timer Recording
11:00 12:00 13:00
1/01
2/01
3/01
1/01
SAT
CHANNEL + / –
Pr 7
REC MODE
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to six hours can be set.
6 Press ENTER to set the end time.
7 Select 'Yes' to set the timer recording and exit, or
'No' to go back to the timer recording screen.
• You can check the timer recording details you just set
from the Schedule Area in GUIDE Plus+; see The
Schedule Area on page 73).
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
HELP
DISC NAVIGATOR
TOP MENU
RDS DISP
ST –
HOME
MENU
TEST TONE
PREV NEXT
REC STOP REC
ì
SURROUND ADVANCED
AUDIO SUBTITLE
TV
Moving the end time by 30-minute blocks
During timer recording, press and hold ì REC for
1
three seconds.
The timer indicator disappears from the front panel
display.
Press ì REC repeatedly to extend recording in 30
2
minute increments.
Recording end time
14:00 15:00 16:00 17:00
11:45 – 13:45
SP HDD/DVD HDD
INFO
GUIDE
CLEAR
TUNE +
DVD MENU
SYSTEM
SETUP
ENTER ST +
RETURN
TUNE – DISPLAY
CM
BACK SKIP
STEP/SLOW
ONE TOUCH
REC MODE COPY
SOUND TIMER REC
ANGLE PLAY MODE
INPUT
Canceling and stopping a timer recording in
progress
After a timer recording has started, you can cancel the
program (but continue recording), or stop recording
completely if you need to.
PREV NEXT
REC STOP REC
ì
SURROUND ADVANCED
AUDIO SUBTITLE
TV
During timer recording, press and hold ì REC for
1
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
2 When you want to stop recording completely,
press STOP REC.
Tip
• You can also stop a timer recording immediately by
STOP REC then selecting Yes to confirm.
pressing
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it into standby.
2 Press and hold on the front panel for three
seconds to lock the controls.
The front panel display briefly shows LOCK. If any buttons
are pressed on the remote or front panel, LOCK is briefly
displayed again.
• To unlock the recorder, press and hold
panel for three seconds until the display shows
UNLOCK.
• To cancel a timer recording when the recorder is
locked, first unlock the recorder (see above), then
press and hold ì REC for three seconds.
CM
BACK SKIP
STEP/SLOW
ONE TOUCH
REC MODE
COPY
SOUND TIMER REC
ANGLE PLAY MODE
INPUT
on the front
06
85
En