Pioneer RCS-77H Operating Insructions page 136

The Initial Setup menu
14
Setting
Parental Lock
Only certain discs have parental lock and country code features. Check the disc packaging to see what features the disc has. If you forget your
password you can reset it by resetting the recorder to its factory settings. See Resetting the recorder on page 139.
Angle Indicator
Options
On-Screen Display
Front Panel Display
Remote Control Mode
AV. Link
When set to Pass Through, make sure to set Power Save (page 130) to Off.
136
En
Options Explanation
Set Password
In order to change the parental lock level or change the country/area
code, set the password using this option. From the following screen,
enter a four-digit number that will be your password.
Change Password In order to change the password, first enter your existing password
and then a new one from the following screen.
Change Level From the following screen, first enter your password and then set a
parental lock level.
Country/Area Code
From the following screen, first enter your password and then set a
country/area code.
On •
A camera icon appears on-screen during multi-angle scenes on a
DVD-Video disc.
Off
Nothing is indicated on-screen when a multi-angle scene is showing.
On • The recorder displays operation displays (Stop, Play, etc.) on-screen.
Off Switches off the on-screen operation displays.
On •
The time is shown in the front panel display when the recorder is in
standby.
Off
The front panel display is switched off in standby (although it still lights
dimly when setting a timer recording).
Recorder 1–3
If you are using more than one recorder in the same room, set them to
(default: Recorder 1) different IDs. This setting sets the recorder ID; to change the remote
controller ID, press and hold RETURN then press 1, 2 or 3 to set. The
remote will only control a recorder with the same ID.
This Recorder Only • Signals received through the AV input when the recorder is in standby
are not passed through to the AV output.
Pass Through Signals received when in standby are passed though to the output for
connected devices. (Note that during EPG data download, the EPG
data is not passed through.)