Resume And Last Memory - Pioneer XV-HTD7 Operating Instruction

04 Getting started
Button What it does
Press to start fast reverse
scanning. Press
resume normal playback.
Press to start fast forward
scanning. Press
resume normal playback.
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
Skips to the next track or
chapter.
FOLDER +/– Skips to the next/previous folder
when playing an WMA/MP3 disc.
Numbers • If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/Super VCD/
MP3
after pressing
• If the disc is playing, playback
jumps to the start of the selected
chapter (title for VR format DVD-
RW discs) or track after a few
seconds (or after pressing
ENTER
• You may find with some DVD discs that
some playback controls don't work in
certain parts of the disc. This is not a
malfunction.
32
En
(play) to
(play) to
WMA/
) after a few seconds (or
ENTER
).
).
Using the front panel controls
The OPEN/CLOSE and
the front panel work the same way as the
remote control equivalents.
The front panel scan and skip buttons
( and
once for chapter/track skip, or press and hold
for scanning.

Resume and Last Memory

When you stop playback of a DVD or Video CD
disc, Resume is shown in the display indi-
cating that you can resume playback again
from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point.
For DVD discs only: If you change discs using
the DISC SKIP, DISC or DIRECT PLAY
buttons, or take the disc out of the player, the
play position is stored in memory. When you
load the disc next time, the display shows
Last Mem and you can resume playback (this
works for up to five discs).
If you want to clear the resume/last memory
(stop) while Resume or Last
point, press
Mem is displayed.
• When a Video CD is loaded, the Resume
point is lost if the system is switched off.
• For the Last Memory function to work, you
must press (stop) to stop playback
before opening the disc tray or changing
the disc.
• The Last Memory function doesn't work
with VR format DVD-RW discs.
(stop) buttons on
) are combined. Press