Connecting Using The Component Video; Output; Listening To Tv Audio Through This; System - Pioneer XV-HTD7 Operating Instruction

02 Connecting up
Connecting using the component
video output
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
TV
VIDEO
• The component video ouptut is
switchable between interlaced and
progressive formats. See Component Out
on page 68 for more on this.
18
En
COMPONENT
INPUT
S-VIDEO
OUT
P P Y
R B
VIDEO
COMPONENT VIDEO OUT
OUT
FRONT
SUB
SPEAKERS
WOOFER
R L

Listening to TV audio through this

system

You can connect the audio output of your TV
to this system so that broadcast TV sound is
played through this system.
• Connect a stereo audio cable (not
supplied) from the audio outputs of your
TV to the TV IN jacks on this system.
TV
CENTER
• If you find that the TV audio is distorting
when played through this system, you can
set the input attenuator to reduce the
input signal level. See Reducing the TV and
line signal levels on page 80.
AUDIO

OUTPUT

ANTENNA
FM
UNBAL
AUDIO
75
OUT IN IN
AM LOOP
L L
COAXIAL ANTENNA
IN
LINE 2
R R
LINE 1 TV