Resume And Last Memory - Pioneer S-DV313 Operating Instructions Manual

Getting started
Button What it does
Pauses a disc that's playing, or
restarts a paused disc.
Stops playback.
DVD and Video CD/Super VCD:
The display shows Resume.
Press again if you want to
cancel the resume function.
(See also Resume and Last
Memory below.)
Press to start fast reverse
scanning. Press
resume normal playback.
Press to start fast forward
scanning. Press
resume normal playback.
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
Skips to the next track or
chapter.
FOLDER +/– Skips to the next/previous folder
when playing an WMA/MP3 disc.
Numbers • If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/Super VCD/
MP3
) after a few seconds (or
after pressing
• If the disc is playing, playback
jumps to the start of the selected
chapter or track after a few
seconds (or after pressing
ENTER
).
(play) to
(play) to
WMA/
ENTER
).
• You may find with some DVD discs that
some playback controls don't work in
certain parts of the disc. This is not a
malfunction.
• Track skip and number buttons for track
selection do not work with unfinalized CD-
R/RW discs.
Using the front panel controls
OPEN/CLOSE,
The
and (stop) buttons work the same way as
the remote control equivalents.

Resume and Last Memory

When you stop playback of a DVD or Video CD
disc, Resume shows in the display indicating
that you can resume playback from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time,
the display shows Last Mem and you can
resume playback (this works for up to five
discs).
If you want to clear the resume/last memory
point, press (stop) while Resume or Last
Mem is displayed.
• When a Video CD is loaded, the Resume
point is lost if the system is switched off,
or switched to a function other than DVD
(CD).
• For the Last Memory function to work, you
must press (stop) to stop playback
before opening the disc tray.
• The Last Memory function doesn't work
with VR format DVD-RW discs.
DVD/CD, FM/AM
03
23
En