Playing Discs - Pioneer XV-HTD7 Operating Instruction

04 Getting started
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an
item on-screen, then press ENTER.
• The button guide at the bottom of every
OSD screen shows you which buttons
you'll need to use for that screen.

Playing discs

The basic playback controls for playing DVD,
CD, Video CD/Super VCD and WMA/MP3
discs are covered here. Further functions are
detailed in the next chapter.
30
En
STANDBY/ON OPEN/CLOSE
DVD/CD
VOLUME
ENTER
ENTER
DISC 1 DISC 2 DISC 3
CD MODE
DISC 4 DISC 5 DISC SKIP
1 If the system isn't already on, press
STANDBY/ON to switch on.
If you're playing a DVD or Video CD/Super
VCD, also turn on your TV and make sure that
it is set to the correct video input.
2 Press OPEN/CLOSE to open the disc
tray.
3 Load a disc.
Load a disc with the label side facing up in the
front-most disc space, using the disc tray
guide to align the disc. (If you're loading a
double-sided DVD disc, load it with the side
you want to play face down.)
If you want to load more discs, press DISC
SKIP (remote or front panel) to rotate the disc
tray. You can load up to five discs at once.
• Do not place discs in the two partially
accessible disc spaces, as it easy to
misalign them. Use only the front-most
space.
• Do not load more than one disc in a
space.
• Before loading or removing discs, always
wait for the disc mechanism to come to a
complete stop.
• Do not rotate the disc tray by hand.
Always use the DISC SKIP button.
• Sometimes, when the disc tray
mechanism is moving, the controls are
inoperative.
Disc number