Pioneer DVR-310 Operating Instructions Manual page 76

The Initial Setup menu
12
1 Select 'Manual CH Setting', then 'Next Screen'.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Press ENTER to go to the country setting screen.
2 Select your country.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
3 Press ENTER to go to the manual channel setting
screen.
• Use the CHANNEL +/– buttons, number buttons or
the SMART JOG on the front panel to change
channels.
From this screen there are eight parameters you can set:
• Skip – If you want to skip the displayed channel
(because there is no station assigned to that
channel), change the Skip setting to On.
• CH System – Set the channel system used in your
area or region.
• Channel – Change the channel number assigned to
the current preset.
• AFT (Auto Fine Tune) – When set to On, the station is
automatically tuned; set to Off to manually fine tune
(see below).
• Level – Set the AFT level (see above).
• Sound System – Set the sound system used for the
current channel.
• Name – Move the cursor right then input a name for
the current station, (up to five characters) then press
ENTER.
76
En
Auto Channel Setting Next Screen
Manual CH Setting
Channel Swapping
VCR Plus+ CH Setting
Auto Channel Setting Manual Channel Setting
Manual CH Setting
Manual Channel Setting
Country
Mexico
Channel Swapping
VCR Plus+ CH Setting
Pr 1
Skip Off
CH System US
Channel
2
AFT On
Level
Sound System M/N
Name
Channel Swapping
The preset swap feature lets you swap the channel
assignments of different programs. This is so that you
can group together station presets which naturally go
together.
1 Select 'Channel Swapping'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out Channel Swapping
Audio In VCR Plus+ CH Setting
Audio Out
Language
Recording
Playback
2 Select 'Next Screen' to go to the swap presets
screen.
Initial Setup
[1] 1/17
Pr System CH Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
1
Swap Preset
3 Use the (cursor up/down) buttons to select
a preset station to swap.
• Use the PREV/NEXT buttons to display the previous/
next page.
Initial Setup
[1] 1/17
Pr System CH Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
5
Swap Preset
4 Press (cursor right), then select a preset
station to swap with the first preset.
Initial Setup
[1] 1/17
Pr System CH Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
5
Swap Preset
Next Screen
[2] 1/17
Pr System CH Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
1
[2] 1/17
Pr System CH Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
1
[2] 1/17
Pr System CH Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
3