Audio Out Settings - Pioneer DVR-310 Operating Instructions Manual

The Initial Setup menu
12
You can adjust the gain of the audio from each external
input individually, from –6dB to +6dB in steps of 3 dB to
optimize the recorded audio level.

Audio Out settings

Digital Out
• Default setting: On
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
If at any time you need to switch off the digital audio
output, set this to Off, otherwise leave it On.
Note
• When set to Off, all the other Audio Out settings are
grayed out and can't be set.
Dolby Digital Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: Dolby Digital
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
If your AV receiver (or other connected component) is
Dolby Digital compatible, set to Dolby Digital, otherwise
set to Dolby Digital
came with the connected component if you're unsure
whether it is Dolby Digital compatible.
80
En
Digital Out On
Dolby Digital Out Off
DTS Out
96kHz PCM Out
MPEG Out
Digital Out Dolby Digital
Dolby Digital Out Dolby Digital PCM
DTS Out
96kHz PCM Out
MPEG Out
PCM. Check the manual that
DTS Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: On
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In 96kHz PCM Out
Audio Out MPEG Out
Language
Recording
Playback
If your AV receiver (or other connected component) has a
built-in DTS decoder, set to On, otherwise set to Off.
Check the manual that came with the connected
component if you're unsure whether it is DTS
compatible.
Important
• If you set to On with a non-DTS compatible amplifier,
noise will be output when you play a DTS disc.
• When set to On, there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when DTS Out
is Off), noise is output from the analog outputs. Do
not play this through your amplifier and speakers.
• When playing a DTS audio CD, make sure that
Stereo is selected using the AUDIO button. See
Switching DVD soundtracks on page 41.
96kHz PCM Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: 96kHz
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In 96kHz PCM Out
Audio Out MPEG Out
Language
Recording
Playback
If your AV receiver (or other connected component) is
compatible with high sampling rate audio (88.2 / 96 kHz),
set to 96kHz, otherwise set to 96kHz
the manual that came with the connected component if
you're unsure whether it is compatible with high
sampling rate audio.
On
Off
48kHz
96kHz 48kHz
96kHz
48kHz. Check