Dts Out; 96Khz Pcm Out; Mpeg Out; Language Settings - Pioneer DVR-320 Operating Instructions Manual

The Initial Setup menu
If your AV amp/receiver (or other connected component)
is Dolby Digital compatible, set to Dolby Digital,
otherwise set to Dolby Digital
manual that came with the connected component if
you're unsure whether it is Dolby Digital compatible.

DTS Out

You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting: On
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In

96kHz PCM Out

Audio Out

MPEG Out

Language
Recording
Playback
If your AV amp/receiver (or other connected component)
has a built-in DTS decoder, set to On, otherwise set to
Off. Check the manual that came with the connected
component if you're unsure whether it is DTS
compatible.
Important
• If you set to On with a non-DTS compatible amp/
receiver, noise will be output when you play a DTS
disc.
• When set to On, there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when DTS Out
is Off), noise is output from the analog outputs. Do
not play this through your amplifier and speakers.
• When playing a DTS audio CD, make sure that
Stereo is selected using the AUDIO button. See
Switching audio channels on page 41.
96kHz PCM Out
You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting: 96kHz
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In 96kHz PCM Out
Audio Out MPEG Out
Language
Recording
Playback
PCM. Check the
On
Off
48kHz
96kHz 48kHz
96kHz
If your AV amp/receiver (or other connected component)
is compatible with high sampling rate audio (88.2 / 96
kHz), set to 96kHz, otherwise set to 96kHz
Check the manual that came with the connected
component if you're unsure whether it is compatible with
high sampling rate audio.
MPEG Out
You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting: MPEG
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In 96kHz PCM Out
Audio Out MPEG Out
Language
Recording
Playback
If your AV amp/receiver (or other connected component)
is MPEG audio compatible, set to MPEG, otherwise set to
MPEG PCM. Check the manual that came with the
connected component if you're unsure whether it is
MPEG compatible.

Language settings

OSD Language

• Default setting: Españal
Initial Setup
Basic OSD Language
Tuner

Audio Language

Video In/Out Subtitle Language
Audio In Auto Language
Audio Out DVD Menu Language
Language Subtitle Display
Recording
Playback
This sets the language of the on-screen menus and
displays.
Audio Language
• Default setting: Spanish
Initial Setup
Basic OSD Language
Tuner Audio Language
Video In/Out Subtitle Language
Audio In Auto Language
Audio Out DVD Menu Language
Language Subtitle Display
Recording
Playback
48kHz.
PCM
MPEG
MPEG PCM
English
Français
Deutsch
Italiano
Español
English
French
German
Italian
Spanish
Chinese
Other
12
79
En