Audio Drc - Pioneer DVR-320 Operating Instructions Manual

11 The Video/Audio Adjust menu
4 Use the
the currently selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
Note
• The Black Setup setting applies only when playing
NTSC discs.

Audio DRC

• Default setting: Off
When watching Dolby Digital material at low volume, it's
easy to lose low level sounds completely—including
some of the dialog. Switching on Audio DRC (Dynamic
Range Control) can help by bringing up the low level
sounds, while controlling high level peaks.
1 During playback or when paused, press HOME
MENU and select 'Video/Audio Adjust'.
2 Select 'Audio Adjust'.
3 Use the
DRC from 'Off' to 'Max'.
Audio Adjust
Audio DRC
Exactly how much difference you can hear between the
settings will depend on the material.
Remember
• Audio DRC is not effective when listening to a disc via
the digital output when Dolby Digital Out is set to
Dolby Digital. In this case adjust the dynamic range
from your AV amplifier/receiver.
72
En
(cursor left/right) buttons to adjust
(cursor left/right) buttons to adjust
Off Max