Video In / Out Settings - Pioneer PRV-9200 Operating Instructions Manual

The Initial Setup menu
13
1 Select 'VCR Plus+ CH Setting', then 'Next Screen'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback
2 Assign channel numbers to the guide channels as
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out VCR Plus+ CH Setting VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback
• Use the (cursor up/down) buttons to change
the guide channel for setting.
• Use the (cursor left/right) buttons to change
the channel number.
• Use the PREV / NEXT button to display the previous/
next 10 guide channels.
3 To return to the Initial Setup menu, press ENTER.

Video In / Out settings

Input Colour System
• Default setting: Auto
Initial Setup
Basic Input Colour System
Tuner Component Video
Video In/Out NTSC on PAL TV
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the recorder automatically detects
whether the video signal from the built-in tuner or from
one of the external inputs is 3.58 NTSC, PAL–60, PAL or
SECAM. You may, however, occasionally need to set it
manually if the picture is not displayed properly.
98
En
Next Screen
VCR Plus+ CH Setting
1/20
Guide CH Guide CH
6
1 6
2 7
3 8
4 9
5 10
Next Screen
1 Select 'Input Colour System', then 'Next Screen'.
2 Use the CHANNEL +/– buttons or the INPUT
SELECT button to switch between the built-in tuner
and the external inputs.
3 Use the (cursor left/right) buttons to
change the input colour system for the current input
or built-in tuner.
• The available settings depend on the Input Line
System setting (see Input Line System on page 96).
The table below shows the different options available.
Input Line System Built-in tuner
525 System 3.58 NTSC
625 System Auto
PAL
SECAM
Component Video Out
• Default setting: Interlace
You only need to make this setting if you connected this
recorder to your TV using the component video jacks.
Initial Setup
Basic Input Colour System
Tuner Component Video
Video In/Out NTSC on PAL TV
Audio In
Audio Out
Language
Recording
Playback
If your TV is compatible with progressive-scan
component video, set this Progressive for the highest
quality picture. If your TV is not compatible with
progressive-scan video, leave it set to Interlace.
See also Progressive scan video in the glossary on
page 120.
2ch
Auto
External input
Auto
3.58 NTSC
PAL–60
Auto
PAL
SECAM
Interlace
Progressive