Vcr Plus+ Ch Setting; Video In / Out Settings; Input Colour System - Pioneer DVR-320 Operating Instructions Manual

12 The Initial Setup menu
The manual tuning function allows you to manually tune
to stations, should you need to.
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
1 From the manual channel setting screen:
• Use the CHANNEL +/– button to change channels.
• If you want to skip the displayed channel (because
there is no station assigned to that channel), change
the Skip setting to On.
• If you want to manually tune the displayed channel,
change the AFT (Auto Fine Tuning) setting to Off,
then move down to Level to manually tune to a
station.
• To return to the Initial Setup menu, press ENTER.

VCR Plus+ CH Setting

• Default setting: n/a
Guide channels are used by the VCR Plus+ system so
that the channel number specified in the VCR Plus+
programming numbers can be guaranteed to
correspond to the correct station.
1 Select 'VCR Plus+ CH Setting', then 'Next Screen'.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
76
En
Auto Channel Setting Next Screen
Manual CH Setting
VCR Plus+ CH Setting
2ch
Skip Off
AFT Off
Level 0
Auto Channel Setting Next Screen
Manual CH Setting
VCR Plus+ CH Setting
2 Assign channel numbers to the guide channels as
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
Initial Setup
VCR Plus+ CH Setting
Basic Auto Channel Setting
Tuner Manual CH Setting Guide
Video Out VCR Plus+ CH Setting VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback
• Use the (cursor up/down) buttons to change
the guide channel for setting.
• Use the (cursor left/right) buttons to change
the channel number.
• Use the PREV / NEXT button to display the previous/
next 10 guide channels.
3 To return to the Initial Setup menu, press ENTER.

Video In / Out settings

Input Colour System

• Default setting: Auto
Initial Setup
Basic Input Colour System
Tuner Component Video
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the recorder automatically detects
whether the video signal from the built-in tuner or from
one of the external inputs is PAL–N, 3.58 NTSC or PAL–
M. You may, however, occasionally need to set it
manually if the picture is not displayed properly.
1 Select 'Input Colour System', then 'Next Screen'.
2 Use the CHANNEL +/– buttons or the INPUT
SELECT button to switch between the built-in tuner
and the external inputs.
3 Use the (cursor left/right) buttons to
change the input colour system for the current input
or built-in tuner.
1/20
CH Guide CH
6
1 6
2 7
3 8
4 9
5 10
Next Screen
2ch
Auto