Connecting To A Cable Box Or Satellite Receiver (2) - Pioneer DVR-320 Operating Instructions Manual

Connecting up

Connecting to a cable box or satellite receiver (2)

If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.
Using the setup on this page you can:
• Record any channel by selecting it on the cable box/satellite tuner.
• Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 51).
Important
• Do not connect this recorder 'through' your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV amp/receiver.
Antenna/cable TV
wall outlet
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2 Connect the AUDIO and VIDEO OUTPUT jacks (1
or 2) on this recorder to a set of audio/video inputs
on your TV using a set of A/V cables (as supplied).
This enables you to watch discs.
3 Connect the audio/video output of your cable
box/satellite tuner to the INPUT 1/AUTO START REC
jacks on this recorder using a set of A/V cables.
This enables you to record scrambled TV channels.
VHF/UHF
TV
IN
1
OUTPUT 1
R L R L
OUT IN
VHF/UHF
AUDIO
Y P P VIDEO AUDIO
B R S-VIDEO
COMPONENT VIDEO OUT
OUTPUT 2
1
3
VHF/UHF A/V
OUT
OUT
VHF/UHF
IN
1
A/V
IN 1
2
INPUT 1/
AUTO START
REC
IN OPTICAL
VIDEO
S-VIDEO
CONTROL DIGITAL OUT
INPUT 3
Cable box/
Satellite receiver
Note
• The setup on this page does not allow you to watch
one channel and record another.
• The diagram shows standard video connections, but
you can alternatively use the S-video or component
video connections if they're available.
AC IN
02
17
En