Suspensions
Refitting
Carry out the above operations by working in the
reverse order from those of the removal.
Locking torques (N*m)
Handlebar fixing screw (*)
Front fork
Removal
After removing the upper seat, lean the vehicle on
one side and extract the steering tube completely
from the fork.
Specific tooling
020055Y Wrench for steering tube ring nut
Overhaul
- Remove the lower screw (1);
- Drain oil from suspension;
- Slide off the stem;
- Replace the sealing rings (3-4) with new ones;
- Fit the new sealing rings only after lubricating their seats;
- Refit the stem and the lower screw (1);
- Unscrew the cap (2);
- Pour 133±2.5 cm³ of Selenia Fork 10W oil per stem on the KAYABA fork, recognisable by the mark
stamped on the sleeves inner side (wheel side)
SUSP - 174
43 ÷ 47
MSS X9 Evolution 250