Suspend/Hibernation - Panasonic Toughbook CF-37 Series Operating Instructions Manual

Starting Up/Shutting Down
Shutting Down (power off your computer)
16
If security indicator (
you must first enter your password. (
Upon entering your
password and press-
ing Enter .
*
If you are starting from the suspend or hibernation mode (
"Suspend/Hibernation Functions"), if after three attempts the correct pass-
word is not input, or if no password is entered for about a minute, the
computer returns to the suspend or hibernation mode.
When an application or file that was previously displayed
appears on your screen,
the suspend or hibernation function has been set. (
Functions")
3
Select your application
You are able to start working on your computer.
NOTE
The power saving function is factory set, so if there is no input from a key, the touch pad,
or the touchscreen for two minutes. The LCD is powered off (ECO mode).
The LCD will resume operation when the touch pad or the touchscreen is used
or a key is pressed. We recommend using a key that will not result in an input
from the keyboard, such as Shift .
[System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager] may contain a device or devices bearing an exclamation mark or ques-
tion mark. This does not indicate a malfunction. Such a mark (exclamation or
question mark) will not be displayed if the operating environment of the device
showing the mark is corrected, by for instance installing the driver of the device.
This procedure is shutting down without using the suspend or hibernation function.
( "Suspend/Hibernation Functions")
1
Display the shut down screen
After saving important data and closing each application, select [Shut Down] from
the [Start] menu.
NOTE
From the keyboard,
You may choose to press down on
2
Confirm shut down
Select [Shut down], then press [OK]. Your computer will power off automatically.
(In the OFF state, if you are not recharging your battery pack or if the pack is fully charged, your
computer consumes approximately 1.5 W.)
Restarting your computer
Select [OK] after selecting [Restart].
NOTE
To quickly resume computer operation after shutting down,
The suspend or hibernation function is available. (
nation Functions")
) is displayed,
"Security Measures")
If the correct password is input,
Over three incorrect attempts,
or no password is entered for about a minute,
, then select the menu with
(without shutting down)
Will Start
Will Not Start*
(Power off)

"Suspend/Hibernation

or .
"Suspend/Hiber-