Panasonic Toughbook CF-31ATA112M Reference Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Laptop
  5. Toughbook CF-31ATA112M
  6. Reference manual
Panasonic Toughbook CF-31ATA112M Reference Manual

Panasonic Toughbook CF-31ATA112M Reference Manual

Panasonic toughbook cf-31ata112m: user guide
Hide thumbs Also See for Toughbook CF-31ATA112M:
Table of Contents

Advertisement

Quick Links

Reference Manual

Model No.
We recommend that this Reference Manual be printed.
Descriptions
• For common procedures and screens for Windows 7 and
Windows XP, this Reference Manual uses the procedures
and screens of Windows 7.
• Some menus may differ for Windows XP.
• Windows XP does not require clicking operation to
the notification area.
1
Personal Computer
CF-31 Series
of

Advertisement

Table of Contents
loading

Related Manuals for Panasonic Toughbook CF-31ATA112M

Summary of Contents for Panasonic Toughbook CF-31ATA112M

  • Page 1: Reference Manual

    Reference Manual Personal Computer CF-31 Series Model No. We recommend that this Reference Manual be printed. Descriptions • For common procedures and screens for Windows 7 and Windows XP, this Reference Manual uses the procedures and screens of Windows 7. •...
  • Page 2 Introduction This manual explains using the Windows 7 or Windows XP default setting. In these instructions, the names are referred as follows. ® “Genuine Windows 7 Professional” as “Windows” or “Windows 7” ® ® “Genuine Microsoft Windows For the users of the model with Discrete Video Controller Your computer is equipped with two graphics processing units (GPUs).
  • Page 3 You can manually change the GPU that is used. Set [Switchable Graphics] to [Switchable]. Turn on or restart the computer. Press F2 or Del while [Panasonic] boot screen is displayed soon after the computer starts the startup procedure. Select the [Main] menu and set [Switchable Graphics] to [Switchable].
  • Page 4 Introduction Click [OK]. Wait until the next [OK] screen appears. Click [OK]. NOTE You cannot change the GPU that is used while operating graphics-related application programs. Once the GPU is switched, switching to the other GPU is not possible for a certain period of time. When a digital display (such as an HDMI display) is connected and the computer’s display is closed, you cannot switch the GPU that is used.

  • Page 5: Key Combinations

    Key Combinations NOTE Do not repeatedly press the keys in quick succession. Do not use the key combinations together with touch pad (external mouse), touchscreen (only for model with touch- screen) or other key operations. Do not use the key combinations before you log on to Windows. Wait until the hard disk drive indicator On the Setup Utility screen, you can use the key combinations of Fn + F1, Fn + F2 and Fn+F3.
  • Page 6 Key Combinations Fn + F3 Display mode switching ( When an external display (a projector etc.) is connected, you can change the dis- play mode. Press Fn + F3. Click the display mode. (Computer only/Duplicate/Extend/Projector only) The change you made may not be effective until Enter is pressed. You can also change the operating mode by pressing Computer only Duplicate...
  • Page 7 Key Combinations Volume Fn + F5 (Fn + F5= down / Fn + F6= up) Fn + F6 NOTE When fine-tuning the sound volume, press and hold Fn, and press F5 or F6 intermittently. This does not work on beeps or speakers connected to the USB port. Fn + F7 Activate sleep Fn + F8...
  • Page 8 • Pop-up icon on/off Start up the Hotkey Settings. Click (Start) - [All Programs] - [Panasonic] - [Hotkey Settings]. Make the settings. [Use Fn key lock] When using an Fn key combination Press Fn once. (Locked) Press another key. (Lock released) When using successive Fn key combinations Press Fn twice.
  • Page 9 Touchscreen <Only for model with touchscreen> You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface with the stylus (included). For further information, click (Start) - [Control Panel] - [Hardware and Sound] - [Pen and Touch] - [Flicks] - [Practice using flicks].
  • Page 10 Touchscreen Maintaining the performance of the touchscreen When the touchscreen becomes dirty, wipe it with an approved soft cloth The touchscreen is specially treated to prevent dirt from adhering to the surface, so dirt can be removed easily using a dry cloth (use only the approved soft cloth).
  • Page 11 Touchscreen Do not apply excessive force to the touchscreen Do not lift the computer while holding the LCD screen, or allow the screen to be twisted. Do not place any objects on the LCD screen. Any of the above may cause the touchscreen glass to break, or may damage the LCD screen. Operation response may be slower in low temperature environments The touchscreen may respond to operations more slowly when using the computer in temperatures less than 5°C, but this is not a malfunction.

  • Page 12: Calibration By A Standard User

    Touchscreen Calibration by a standard user NOTE Perform the following calibration for each user. Run [Tablet PC Settings]. Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings]. Click [Calibrate]. Using the stylus, touch each of the “+” target marks one by one, and then click [OK]. Perform the calibration for the orientation to be used.
  • Page 13 An external mouse or trackball connected via the keyboard/mouse port of port replicator (optional) or the car mounter (optional) will not work during handwriting in the touch pad mode. Windows XP: [start] Windows XP: standby (Start) - [All Programs] - [Panasonic] - [Hand Writing Utility]. on the notifica-...
  • Page 14 Sleep or Hibernation Functions Starting Up Your Computer Quickly The sleep or hibernation functions allow you to shut off the computer without closing programs and documents. You can quickly return to the programs and documents that you were working on before sleep Function Data is saved to Memory...
  • Page 15 Sleep or Hibernation Functions Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced]. Select [Stand by] or [Hibernate] for [When I close the lid of my portable computer:] / [When I press the power button on my computer:], and then click [OK]. NOTE You do not need to make the setting if you use the Windows menu to enter standby or hibernation.
  • Page 16 Failing the password input while resuming from hibernation: • At the next resume, Panasonic boot screen will appear. At this time, do not start the Setup Utility and do not change settings. Otherwise, resume may not operate correctly.
  • Page 17 Sleep or Hibernation Functions To enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter hibernation, click [start] - [Turn Off Computer], then press and hold Shift and click [Hibernate]. CAUTION While the computer is entering sleep Do not: •...
  • Page 18 Sleep or Hibernation Functions To resume from sleep Open the display, or slide the power switch (A). In the default setting, the Windows password will be requested to resume. When [Stand by] or [Hibernate] is selected as the setting for [When I close the lid of my portable computer] ( the display.

  • Page 19: Saving Power

    Click (Start) - [Control Panel] - [System and Security] - [Power Options] to select [Power saver]. While [Panasonic Power Management] is selected as the factory default, selecting [Power saver] will further reduce power con- sumption. Also, to make detailed settings such as reducing the time entered in the [Turn off the display] setting, click [Change plan settings].
  • Page 20 To confirm current settings, [Advanced] to view [Wired LAN standby power saving function] or [Wireless LAN standby power saving function]. click [start] - [All Programs] - [Panasonic] - [Power Saving Utility] to view [Wired LAN standby power saving function]. Use [Switchable Graphics] to select [Low speed] in [Fan control] (...
  • Page 21 Fan control Select [Low speed] to save power. ([Standard] is selected at the time of purchase.) Setup Click [start] - [All Programs] - [Panasonic] - [Power Saving Utility]. Click [Enable] for each function. Click [OK] in the confirmation screen that appears.
  • Page 22 Saving Power Using Catalyst™ Control Center Utility <When the discrete GPU with higher power consumption is activated> Setup Click (Start) - [All Programs] - [Catalyst Control Center] - [CCC – Advanced]. Click [Power Play™]. Click [Graphics] - [PowerPlay™]. Select [Maximize Battery Life] in [Plugged In:] and [Battery:]. Click [OK].

  • Page 23: Security Measures

    Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Con- tact Panasonic Technical Support. When running the Setup Utility, do not leave and go away from your computer even for a short time, since other people may set or change the password.
  • Page 24 23). When you have your hard disk drive repaired • Contact Panasonic Technical Support. • Before sending back the hard disk drive, be sure to set the [Hard Disk Lock] to [Disabled]. NOTE The hard disk lock function works with the built-in hard disk. It does not work with the external hard disk.

  • Page 25: Battery Power

    Battery Power Battery Indicator Battery indicator: Battery indicator Not lit The battery pack is not inserted or not being charged. Orange Charging is in progress. Green The battery is fully-charged. Blinking green In high temperature mode, the battery pack is discharging the power to 80% temperature mode ( The remaining battery is approximately 9% or less.
  • Page 26 Battery Power Checking the Remaining Battery Charge You can check the remaining battery charge on the screen. (After logging on to Windows) Press When the battery pack is inserted (example) : Normal temperature mode : High temperature mode ( When the battery pack is not inserted NOTE The battery display may not correspond to the actual remaining battery charge in the cases as below.
  • Page 27 Battery Power NOTE Note that a level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% charge level for normal temperature mode. After switching from [Normal Temperature] to [High Temperature] or vice versa, the remaining battery capacity will not be displayed correctly until the battery pack is completely discharged or fully charged.
  • Page 28 Battery Power Computer behavior with low battery The default settings are as follows. When the battery level becomes 10% [Low battery alarm] Displays a message that the battery level is low. ↓ Charge the battery. Connect the AC adaptor immediately. If you do not have the AC adaptor, exit the running programs and Windows, then confirm that the power indicator is off.
  • Page 29 Perform “Battery Recalibration”. Click (Start) - [All Programs] - [Panasonic] - [Battery] - [Battery Recalibration]. When the confirmation message appears, click [Start]. Frequent recalibration of the battery can degrade the battery. A caution message appears when the battery recalibration is performed at the shorter interval than approximately a month. In this case, cancel the battery recalibration.
  • Page 30 Battery Power Restart the computer. Press and hold F9 while the [Panasonic] boot screen is displayed just after the computer starts the startup proce- dure. When the remaining battery capacity is displayed, press Enter. Follow the on-screen instructions. Replacing the Battery Pack The battery pack is a consumable item so the replacement will be necessary.
  • Page 31 Battery Power Slide the latch (A) down, and open the cover. Pull the tab (B) of the battery pack. To insert Insert the battery pack until it securely fits the connector. Close the cover until it clicks.
  • Page 32 Battery Power Slide the latch (C) to the left to lock the cover. CAUTION Make sure the latch is securely locked, otherwise the battery pack may fall when you carry the computer.
  • Page 33 Customizing the Power Setting You can choose the optimum power setting for your operating condition by selecting a power plan. You can also create your own power plan. Changing the Power Plan Setting Click on the notification area and click [More power options]. Click [Change plan settings] of the power plan you want to change.

  • Page 34: Multimedia Pocket

    Multimedia Pocket You can attach the following devices. (refer to recent catalogs and other sources for information about the products available) DVD MULTI drive (optional) CAUTION Do not insert/remove the multimedia pocket device in sleep indicator or the hard disk drive indicator NOTE Refer to the catalogs etc.
  • Page 35 Multimedia Pocket Slide the latch (A) and open the cover. Press the release handle (B). The release handle pops out. Pull the release handle (B) to draw out the device partway, and hold the device on its both sides to remove. Carefully insert the device into the multimedia pocket by pushing both corners until it surely fits in the slot.

  • Page 36: Setup Utility

    Multimedia Pocket NOTE You can see that the device is recognized or not by double-clicking Setup Utility ( page 87). If the device is not recognized (or if the media cannot be accessed), turn off the computer and reinsert the device. Windows XP: is not displayed Windows XP: by double-clicking...
  • Page 37 PC Card / ExpressCard You can insert the following cards. ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A) PC Card Type I (3.3 mm) or II (5.0 mm) to the PC Card slot (B) For model with Smart Card slot ( NOTE The following types of card are not supported: PC Card Type III (10.5 mm), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards...
  • Page 38 PC Card / ExpressCard Insert the ExpressCard (upper slot) (D) or the PC Card (lower slot) (E) with the label side up until it securely fits in to the slot. For further information, refer to the instruction manual of the card. To remove the card Disable the card function.
  • Page 39 PC Card / ExpressCard NOTE Check the card’s specification to prevent the total operating current from exceeding the allowable limit. Otherwise mal- function may occur. Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA Some types of cards cannot be used simultaneously. After repeating insertion and removal, some types of card will not be recognized.

  • Page 40: Sd Memory Card

    To format the SD Memory Card on this computer, do not use [Format] of Windows, but use the SD Memory Card format software. You can download the software from the web site below. http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html To use the SD Memory Card on other devices, format the card on the devices. For further information, refer to the instruc- tion manual of the devices.
  • Page 41 Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages, direct or indirect.
  • Page 42 SD Memory Card To remove the card Preparation Save the data and close all applications. Open the cover and confirm the SD Memory Card indicator is off. Disable the card function. Click on the notification area and click Select the card. Double-click on the notification area and click [Secure Digital Storage Device], then click [Stop].

  • Page 43: Smart Card

    Smart Card <Only for model with Smart card slot> You need software and a driver to use a Smart card. CAUTION Do not: • Hit, bend, or drop the card. • Touch the contact part with fingers or metal object. •...

  • Page 44: Ram Module

    RAM module specifications: 204 pins, SO-DIMM, 1.5 V, DDR3 SDRAM, PC3-8500 (For information of RAM module compatibility, contact Panasonic Technical Support.) CAUTION RAM modules are extremely sensitive to static electricity and can be affected even by static electricity from the human body.
  • Page 45 RAM Module Insert/Remove the RAM module. To insert Tilt the module slightly and insert it in the slot. Align the cutout (C) with the projection, and press down the module so that the right and left hooks (D) are locked. To remove Carefully open the right and left hooks (D).
  • Page 46 USB port on the computer, not to the USB port on the port replicator or the car mounter. You cannot use the AC adaptor (CF-AA1653A) included with this computer for the port replicator or the car mounter. Contact Panasonic Technical Support. When using a conventional port replicator (such as the CF-VEB272AW / CF-VEB272A2W), power consumption will automatically be lowered to match the port replicator’s specification using one or more of the following measures.
  • Page 47 Port Replicator / Car Mounter NOTE When you do not use the expansion bus connector, close the slide cover so that por- tion (B) matches the mark (C).

  • Page 48: External Display

    External Display You can switch the output destination to an external analog display. First slide the latch on the cover and open the cover. Connect the external display to the external display port (A). You can also switch the output destination to an external HDMI display. First slide downward and open the cover.
  • Page 49 External Display NOTE Until Windows startup is completed (during Setup Utility, etc.), the simultaneous display cannot be used and pressing Fn + F3 switches the display between the internal LCD and the external display. After resuming from sleep or hibernation, or restarting the computer, the output destination may not be the same as the selected in the previous status.
  • Page 50 It also allows you to set the scaling rate of an external HDMI display. Click (Start) - [All Programs] - [Panasonic] - [Display Selector]. Make the required settings. [Operating Mode] (A) Select [Single Display] to activate only one display.
  • Page 51 External Display Port Replicator HDMI: HDMI display connected to the port replicator VGA (Analog RGB): Analog display connected to either the computer or the port replicator [Resolution] (C) Select the resolution of the display. When [Extended Desktop] is selected in [Operating Mode], the resolution can be selected for the primary device and the secondary device independently.
  • Page 52 External Display The pop-up icon displayed by Fn key combination appears only on the primary device. <Only for model with touchscreen> Set the internal LCD to the primary device when using the touchscreen. The cursor will move on the primary device when you touch the internal LCD.
  • Page 53 External Display Various Ways to Change the Display Settings In addition to the Display Selector utility, the following methods are available for changing display settings. To switch to the extended desktop Click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Graphics and Media] - [Display Devices].
  • Page 54 External Display Click (Start) - [Control Panel] - [Hardware and Sound] - [Sound Playback]. Select the sound output destination. Click [Set Default], and then click [OK]. Click [start] - [Control Panel] - [Sound, Speech, and Audio Devices] - [Audio]. Select the sound output destination in [Default Device]. Click [OK].

  • Page 55: Usb Devices

    USB Devices Connecting/Removing USB Devices Preparation Attach the device for the media containing the device driver (e.g., CD-ROM). Equipment connected to the multimedia pocket cannot be recognized if connected after the USB device driver installation screen appears. To connect the USB device Open the cover and connect the USB device to one of the USB ports (A, B, C or D).
  • Page 56 USB Devices Double-click on the notification area and select the USB device, then click [Stop]. Follow the on-screen instructions. These steps are not necessary when; • Removing the device after turning off the computer. • is not displayed. • The device does not appear in the list in step A. Remove the USB device.

  • Page 57: Ieee 1394 Devices

    IEEE 1394 Devices <Only for the model with IEEE 1394 interface> You can connect a digital video camcorder or other IEEE 1394 standard device to the computer. To connect IEEE 1394 device Preparation Attach the device for the media containing the driver (e.g., CD-ROM). Equipment connected to the multimedia pocket cannot be recognized if connected after the IEEE 1394 device driver installation screen appears.

  • Page 58: Fingerprint Reader

    Fingerprint Reader <Only for model with Fingerprint Reader> NOTE Enrollment and authentication is unavailable to an extremely minority of people including those whose fingerprints give little data for personal identification. How to Use the Fingerprint Reader This section explains how your fingerprints are enrolled and authenticated. Slide your finger to the right or left.
  • Page 59 Fingerprint Reader CAUTION To protect the fingerprint sensor, be sure to close the cover when not using the fingerprint reader. We shall not be liable for any loss or damage whatsoever resulting from your Fingerprint device or neglect of Fingerprint device use, or any data loss resulting from such developments as Fingerprint authentication device malfunctioning.

  • Page 60: Security Functions

    Fingerprint Reader Precautions Security Functions Fingerprint Authentication Technology does not guarantee complete authentication and individual identification. Please acknowledge we shall not be liable for any loss or damage whatsoever resulting from the use of, or inability to use your Fingerprint device. The Fingerprint authentication method uses multiple fingerprints, encryption keys, credentials data and passwords.
  • Page 61 Fingerprint Reader Log on to Windows as an Administrator. The “Fingerprint software Icon” • If the icon does not appear, click TPM Fingerprint Utility Initialization Performed by the Computer Administrator. The “Invalid TPM status” message is displayed by the “Fingerprint software Icon” •...
  • Page 62 Fingerprint Reader NOTE Enroll at least two fingers. Even if one of them is injured, you can use another one to access your account and secret data. For further information about the enrollment, refer to “How to Use the Fingerprint Reader” ( [Tutorial].
  • Page 63 If you have not done this, have enrolled your fingerprint using Protector Suite, and have already made Power-on Security effective, after step B, your fingerprint authentication will be necessary. Turn on or restart the computer. Press F2 or Del while [Panasonic] boot screen is displayed soon after the computer starts the startup procedure. Select the [Security] menu.
  • Page 64 Fingerprint Reader Useful Information Backup The file described below is necessary for recovering the Fingerprint authentication data. Back up this file periodically in a safe location such as removable disk to avoid data loss resulting from some accidents. We recommend you to store the file in a removable disk or network drive because the benefit of Fingerprint authentication security can be reduced if you keep the file in the internal hard disk drive.
  • Page 65 Fingerprint Reader Limitations in Use Password Bank limitations: The following web pages cannot be supported. Web pages which are created by the following technologies: • Web forms created on the fly using JavaScript. • Web forms which looks as one form (e.g. login field, password field), but internally created with two independent forms. •...
  • Page 66 Fingerprint Reader NOTE The data enrolled in the fingerprint sensor is not image data. You cannot restore fingerprint image data from the data enrolled in the fingerprint sensor. Disable Power-on Security Log on to Windows as an Administrator. Click (Start) - [All Programs] - [Protector Suite] - [Control Center].
  • Page 67 Make sure your fingerprint sensor is working. • Use the Tutorial wizard to verify that the fingerprint sensor works. If not, reboot and try again. If it still does not work, please contact Panasonic Technical Support. Restore or create passport.
  • Page 68 Modem <Only for model with modem> Connecting the Internal Modem with a Telephone Jack CAUTION You cannot connect the modem to the following lines. • Interphone • Intercoms • ISDN Be sure to connect the telephone cable into the modem port, not into the LAN port. Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event of a lightning strike.
  • Page 69 Modem Ring Resume Function The computer automatically resumes from sleep You will need software to keep the computer in idle state waiting for a phone call, and if you prefer, to turn the computer to sleep again afterward. For further information, refer to the instruction manual of the software application. To enable this function Click (Start) - [All Programs] - [Windows Fax and Scan].
  • Page 70 Modem Click on the notification area and click [More power options] - [Change when the computer sleeps]. Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]. Set the expected communication time for the sleep NOTE This function does not work when the computer is off or in hibernation.
  • Page 71 Connecting LAN CAUTION Do not connect the telephone cable to the LAN port. Turn off the computer. Do not use sleep or hibernation. Slide downward and open the cover, and connect the cable. Connect the LAN port (A) and the network system (server, HUB, etc.) using a LAN cable.
  • Page 72 Power On by LAN/Wake Up from Wired LAN NOTE With this function enabled, power is consumed even if the computer is in sleep to use the AC adaptor. Even when a password is set in the Setup Utility and [Password On Boot] or [Password On Resume] is set to [Enabled], entering the password is unnecessary for turning on or resuming the computer.

  • Page 73: Enabling/Disabling The Wake Up From Wired Lan Function

    Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [Network adapters] and double-click [Intel(R) 82577LM Gigabit Net- work Connection], and then click [Advanced]. Click [Enable PME] in [Property] and select [Enabled] in [Value], and then click [OK]. NOTE The computer may accidentally turn on if the linkage status is changed.
  • Page 74 Click [Power Management], add (to enable) or remove (to disable) check marks of [Allow the computer to turn off this device to save power] and [Allow this device to wake the computer] , and then click [OK]. We recommend you to make the above 2 settings ON/OFF simultaneously. NOTE The computer may start up if accessed by another computer on the network.
  • Page 75 Disabling/Enabling Wireless Communication <Only for model with wireless LAN, wireless WAN, and/or Bluetooth> There are several ways of disabling and enabling wireless communication. The wireless switch on the left side of the computer (below) Wireless Switch Utility ( page Settings in the [Advanced] menu of the Setup Utility ( Setting in the Wireless Connection Disable Utility ( Settings in the Network and Sharing Center ( NOTE...
  • Page 76 Disabling/Enabling Wireless Communication Right-click Click [start] - [All Programs] - [Atheros] - [Atheros Client Utility]. NOTE If you uninstall the Wireless Switch Utility, set the wireless switch to ON beforehand. Do not turn on/off the switch repeatedly at too short intervals. Do not restart, log off, or enter sleep Do not turn on/off the switch while Windows is starting up.
  • Page 77 Disabling/Enabling Wireless Communication To change the function of the wireless switch In the default setting, the wireless switch enables devices that you select turning the wireless switch off last time. You can change this function. [Selects the device for which to turn the device status on each time with the dialog box.] Display a dialog each time you set the wireless switch to ON so you can choose which wireless device to enable.

  • Page 78: Checking The Status Of The Wireless Connection

    Disabling/Enabling Wireless Communication Checking the status of the wireless connection NOTE The Wireless Switch Utility should also be installed so that the Wireless Connection Disable Utility works. The Wire- less Switch Utility has already been installed at the factory. To use the utility, set [Wireless Switch] to [Enabled] in the [Advanced] menu of the Setup Utility ( page 92).
  • Page 79 Disabling/Enabling Wireless Communication Status indication After installation, the Wireless Connection Disable Utility is automatically started after a user is logged in. An icon appears on the notification area. : Indicates that • the utility is enabled, and • the wireless connection is disabled since a LAN cable is connected. : Indicates that •...

  • Page 80: Wireless Lan

    Wireless LAN <Only for model with wireless LAN> CAUTION Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect devices. Follow the instructions of airline companies and hospitals. If you use the computer in these locations, turn off the wire- less LAN.

  • Page 81: Wireless Wan

    Wireless LAN Turn on wireless LAN in the Wireless Switch Utility ( NOTE You can use the following procedure instead of turning on wireless LAN in the Wireless Switch Utility. Click (Start) - [Control Panel] - [Adjust commonly used mobility settings]. Click [Turn wireless on] in [Wireless Network].

  • Page 82: On The Notification Area

    Wireless LAN Input necessary information and add check marks for [Start this connection automatically] and [Connect even if the network is not broadcasting] and click [Next]. Setting the Profiles Right-click The [Atheros Client Utility] screen appears. When When you double-clicked Click [Profile Management], and click [New].

  • Page 83: Bluetooth

    Bluetooth <Only for model with Bluetooth> You can access internet and other Bluetooth devices without connecting cables. NOTE Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body. To use Bluetooth, set [Bluetooth] to [Enabled] (default) in the [Advanced] menu of the Setup Utility ( page 92).

  • Page 84: Hard Disk Drive

    Hard Disk Drive Inserting/Removing the Hard Disk Drive To change your hard disk drive, contact Panasonic Technical Support. CAUTION Back up all the important data before removing the hard disk drive. If you need to read the hard disk data on another computer for repair or any other purpose, set [Hard Disk Lock] to [Disabled] in the [Security] menu of the Setup Utility ( Carefully remove/insert the hard disk drive since the hard disk drive is extremely sensitive to shock.
  • Page 85 Hard Disk Drive Pull the tab (C) of the hard disk drive and slide it out of the slot. To insert Insert the hard disk drive until it surely fits in the slot. Close the cover and slide the latches (D and E) back to lock the cover. Insert the battery pack ( Windows XP: standby CAUTION...

  • Page 86: Setup Utility

    Starting the Setup Utility Turn on or restart the computer. Press while [Panasonic] boot screen is displayed soon after the computer starts the startup procedure. When [Enter Password] is displayed, enter your password. When you start the Setup Utility with Supervisor Password You can make the settings of all items of the Setup Utility.
  • Page 87 Setup Utility Information Menu Language Product Information Model No. Serial No. System Information Processor Type Processor Speed Memory Size Available Memory Hard Disk Optical Drive BIOS Information BIOS Embedded Controller Intel(R) ME firmware Accumulative Operating Time Access Level When the mounted memory capacity is 4 When the mounted memory capacity is more than 4 or less, Available Memory is 2 , Available Memory is 8...

  • Page 88: Disabled Enabled Auto

    Setup Utility Main Menu System Date • Day of the Week/Month/Day/Year. • You can use Tab to move the cursor. System Time • 24-hr. style. • You can use Tab to move the cursor. Main Configuration Touch Pad Touchscreen Mode •...

  • Page 89: Disabled Enabled Auto

    Setup Utility <Only for the model with Discrete Video Controller> Switchable Graphics • Select which one of the two graphics processing units (GPUs) is used. • When [Switchable] is selected (default value), [Power Saving Video] is automatically enabled when the computer starts up. •...
  • Page 90 Setup Utility Environment Current Status • Only when [Environment] is set to [Auto]. Concealed Mode Configuration The submenu that appears when [Concealed Mode Configuration] is selected: Concealed Mode LCD Backlight • Can be changed only when [Concealed Mode] is set to [Enabled]. •...

  • Page 91: Enters The Sub- Menu

    Setup Utility Advanced Menu CPU Configuration The submenu that appears when [CPU Configuration] is selected: Execute-Disable Bit Capability • [Enabled] indicates that this computer supports hardware-based Data Execution Prevention (DEP). Hyper Threading Technology Core Multi-Processing Intel (R) Virtualization Technology Peripheral Configuration Serial Port Settings •...

  • Page 92: Table Of Contents

    Setup Utility Serial Port A I/O IRQ • Can be changed only when [Serial Port A] is set to [Enabled]. Serial Port B I/O IRQ • Can be changed only when [Serial Port B] is set to [Enabled]. • Only for model with GPS I/O IRQ •...

  • Page 93: Disabled Enabled

    Setup Utility Modem • Only for model with internal modem ExpressCard Slot PC Card Slot SD Slot IEEE1394 Port • Only for model with IEEE 1394 interface Smart Card • Only for model with Smart Card slot USB Port Port Replicator USB Port •...
  • Page 94 • When you select [Disabled] in the following menu, the disabled [Boot Option] is ignored and the boot device in the next [Boot Option] operates. Hard Disk CD/DVD Drive USB Floppy Disk USB Hard Disk USB CD/DVD Drive Disabled Use the Panasonic USB floppy disk drive (optional: CF-VFDU03U) [Hard Disk] [CD/DVD Drive] Normal Fast USB Floppy Disk Hard Disk CD/DVD Drive...
  • Page 95 Setup Utility Prompt • When [Setup Utility Prompt] is set to [Disabled], the message “Press F2 for Setup / F12 for LAN” is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message is not displayed.
  • Page 96 Setup Utility Exit Menu Save Values and Reboot Reboot Without Saving Changes Save Options Save Current Values Load Previous Values Load Default Values Boot Override (Device Information) Diagnostic Utility To reboot the system after saving the changes. To reboot the system without saving the changes. To save the changes for all Setup options.
  • Page 97 Outlook Express. Some characters of website and e-mail may not be enlarged. Preparation Close all of the applications before using “Icon Enlarger”. Click [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. Select the size. Click [OK]. The screen will be displayed in the selected size.
  • Page 98 Loupe Utility You can magnify the specific part of the screen. Activating the Loupe Utility Click (Start) - [All Programs] - [Panasonic] - [Loupe Utility]. Click [OK]. appears on the notification area. If Using the Loupe Utility Point the cursor Press and hold , and right-click.
  • Page 99 Loupe Utility Setting the Loupe Utility Click on the notification area and right-click Click [Settings]. [Show/hide shortcuts assignment] When using the external mouse/touch pad Click [Mouse/Touch pad] Click a combination of Alt, Ctrl, and Shift, and add the check mark. (Multiple keys can be combined;...

  • Page 100: Hardware Diagnostics

    If it appears that the hardware installed in this computer is not operating properly, you can use the PC-Diagnostic Utility to determine whether or not there is a problem. If the utility discovers a problem in the hardware, contact Panasonic Technical Support. Software cannot be checked using this utility.
  • Page 101 Tap or click (right click cannot be used) Click (close) Internal keyboard operations Press Space, and then press (close) cannot be selected) Press Space above the icon Press Ctrl + Alt + Del page 75). while [Panasonic] boot screen is dis- ...
  • Page 102 At the confirmation message, select [Yes] and press Enter. The computer will restart. While [Panasonic] boot screen is displayed, press and hold appears at the bottom of the display. When the PC-Diagnostic Utility starts up, it will automatically begin the diagnostic check for all hardware compo- nents.

  • Page 103: The Computer

    Hardware Diagnostics Click the icon for the hardware that is not to be checked, so that the icon is displayed in gray (B). When running a check on the memory or the hard disk, clicking the icon once will turn on the extended diagnostic check (“FULL”...
  • Page 104 [Backup and Restore Center] and [System Recovery Options] allow you create a backup of the entire hard disk data, which can be used to recover from hardware failure. Panasonic Corporation will bear no responsibility for any damage suffered (including loss of data) as a result of the use of this function.
  • Page 105 If pressing F8 does not display [System Recovery Options], use the Product Recovery DVD-ROM for Windows 7. Turn off the computer and insert the CD/DVD drive into the multimedia pocket ( Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed. • The Setup Utility starts up.

  • Page 106: Hard Disk Data Erase Utility

    If you need to erase highly confidential data, we recommend that you contact a company that specializes in this process. Panasonic Corporation will bear no responsibility for losses or damages suffered as a result of the use of this utility.
  • Page 107 Hard Disk Data Erase Utility If the password is requested, enter the Supervisor Password. Set the Product Recovery DVD-ROM into the CD/DVD drive. Select the [Exit] menu, then select [ TEAC DV-W28XXX ] in [Boot Override]. Press Enter The computer restarts. If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User Password.

  • Page 108: Technical Information

    Technical Information Network Connections and Communications Software Close the communications software before using the power saving function. If the power saving function (sleep nection may be interrupted, or the performance may be adversely affected. In this case, restart the computer. In a network environment, set [Never] for [Put the computer to sleep] and [Hibernate after] ( In a network environment, set the [System standby] and [System hibernates] settings to [Never].
  • Page 109 Error Message Follow the instructions below when an error message appears. If the problem persists or if the error message is not shown here, contact Panasonic Technical Support. Error Message Bad System CMOS System CMOS Checksum Error Invalid Year. System date restored to 01/01/2010 Press <F2>...

  • Page 110: Shut Down

    Refer to the following instructions when a problem occurs. If the remedies indicated in the chart do not solve the problem, contact Panasonic Technical Support. For a software problem, refer to the instruction manual of the software. • To check the computer’s usage status ( Shut Down Cannot shut down or restart Windows.
  • Page 111 Troubleshooting (Advanced) Sleep or Hibernation Cannot enter sleep or hibernation automatically. The computer does not resume. Windows XP: standby Sound No sound. Distorted sound. Cannot change the volume by press- ing Fn + F5 or Fn + F6. When logging on (e.g., resuming the computer), audio is distorted.
  • Page 112 Troubleshooting (Advanced) Keyboard Only numbers can be input. Only capital letters can be input. Cannot enter special characters (ß, à, ç, etc.) and symbols. Windows XP: [start] Network Cannot connect to a network. Cannot check the computer’s MAC address. Windows XP: [start] Wireless Communication (only for model with wireless LAN/wireless WAN) Cannot connect to a network.

  • Page 113: Connecting Peripherals

    Troubleshooting (Advanced) Wireless Communication (only for model with wireless LAN/wireless WAN) Access point is not detected. Connecting Peripherals An error occurs while installing the driver. Shorten the distance between the computer and the access point, and try the detection again. Confirm the following settings: •...
  • Page 114 If the mouse does not work even after installing the driver, set [Touch Pad] to [Disabled] in the [Main] menu of the Setup Utility ( You can use only the Panasonic CF-VFDU03U USB floppy disk drive (optional). Connect the floppy disk drive directly to a USB port of the computer. Do not connect it via a USB hub or USB connector of the port replicator or the car mounter.
  • Page 115 Troubleshooting (Advanced) Connecting Peripherals The RAM module is not recognized. You do not know the address map for IRQ, I/O port address, etc. The device connected to the serial port does not work. The Serial Port B of the port replicator or the car mounter does not work.
  • Page 116 Click [start] - [Run] and input [c:\util\cpupower\setup.exe], and click [OK]. Follow the on-screen instructions. Click [start] - [All Programs] - [Panasonic] - [CPU Idle Setting]. Click [Performance] and click [OK], then click [Yes]. The computer will restart. If the problem persists, click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes], select [Always On] in [Power schemes], and click [OK].
  • Page 117 Troubleshooting (Advanced) Touch Pad / Touchscreen (only for model with touchscreen) Cannot input using the touch pad. <Only for model with touchscreen> Cannot point the correct position using the included stylus. <Only for model with touchscreen> Cannot input using the touchscreen Cannot use scroll function of touch pad on Internet Explorer.
  • Page 118 Clean the fingerprint sensor. For further information, refer to “Handling & Maintenance” ( page 65). The fingerprint sensor may be malfunctioning when it continues to perform poorly after the steps described above have been performed. Contact Panasonic Technical Support. page page 58) and...
  • Page 119 Troubleshooting (Advanced) Fingerprint Reader (only for model with Fingerprint Reader) Sensor does not work. Exported passport can help you if you need to replace the sensor. • Log on to Windows as an Administrator. You can always access the computer by using your Windows log on password.
  • Page 120 Troubleshooting (Advanced) Fingerprint Reader (only for model with Fingerprint Reader) User cannot use enrolled finger. (e.g. injury) TPM failure. It is strongly recommended to enroll at least two fingers to avoid this problem. If you enrolled multiple fingers, simply use other finger. If you only enrolled one finger that can be used, we recommend to use the [Manage Fingerprints] wiz- ard and enroll additional fingerprints.
  • Page 121 Troubleshooting (Advanced) Fingerprint Reader (only for model with Fingerprint Reader) Replacing sensor. Protector Suite reinstallation. Lost [File Safe] backup password. Accessing [File Safe] after Protector Suite uninstallation. Accessing [File Safe] after computer crash. If you need to replace a non-functioning fingerprint reader, follow this procedure.
  • Page 122 Troubleshooting (Advanced) Fingerprint Reader (only for model with Fingerprint Reader) Removing data from the reader. “Lift Finger” is displayed during opera- tion. Windows XP: [start] Fast User Switching Function Some applications do not work prop- erly. When enrollment to the device is used, passport data is stored to the device. To remove it, go to the [Delete user data] passport wizard and delete existing passports.
  • Page 123 Troubleshooting (Advanced) Others No response. Windows XP: [start] Press Ctrl + Shift + Esc to open Task Manager and close the software application. An input screen (e.g., password input screen at startup) may be hidden behind another window. Use Alt + Tab to check. Shut down by sliding and holding the power switch for 4 seconds or longer, and turn on the computer and open the application again.
  • Page 124 If you use a guest account to log in Click (Start) - [All Programs] - [Panasonic] - [PC Information Viewer] - [PC Informa- tion Viewer]. Select the item to display the detailed information. To save the information as a text file Display the information you want to save.
  • Page 125 Alternatively you can save a copy of the screen in the following procedure. Click (Start) - [All Programs] - [Panasonic] - [PC Information Viewer] - [Screen Copy]. NOTE The image is a bitmap file in 256 colors. When using the extended desktop ( The default key combination to copy is Ctrl + Alt + F7.
  • Page 126 Disclaimer Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Trademarks • Microsoft, Windows, Windows 7, the Windows logo, and IntelliMouse are registered trademarks or trademarks of Microsoft Corporation of the United States and/or other countries.

This manual is also suitable for:

Toughbook cf-31ata301mToughbook cf-31ata741mToughbook cf-31ata711mToughbook cf-31ata721mToughbook cf-31ata722mToughbook cf-31ataaa1m ... Show all

Table of Contents