Touch Pad (Basic Operation) - Panasonic Toughbook CF-37 Series Operating Instructions Manual

Touch Pad
Work Surface
Right Button
Left Button
(Basic Operation)
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to
NOTE
The touch pad has been designed to work only when a finger is used. Therefore, do not use any
implement on the touch pad.
Basic Operation
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Handling the Touch Pad
Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (i.e. nails), hard objects that can leave marks (i.e. pencils and ball point pen).
Do not allow things that could dirty the touch pad, such as oil. The cursor may not work
properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene or thinner, or disinfectant-type alcohol.
"Touch Pad (Advanced)".
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on
While holding down the
the second tap leaving
button, moving your fin-
your finger down (apply-
ger on the work surface.
ing pressure) and moving
it on the work surface.
clicking
double-clicking
13