Basic Play - Panasonic DVD-S54 Operating Instructions Manual

Basic play

Power ON.
Load the disc.
• Load double-sided discs so
the label for the side you
want to play is facing up.
Skip
• Press [u i] to skip titles, chapters, tracks, etc.
• Can also skip to the markers.
DVD-VR
Stop
The position is memorized when "RESUME STOP" is
displayed on your television screen.
• Press [q] (PLAY) to resume. (Resume play)
• Press [g] to clear the position.
Standby/on switch ( )
8
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
The United Kingdom and Republic of Ireland
Standby/on indicator (^)
When the unit is connected to the AC mains supply, this indicator lights up in standby
mode and goes out when the unit is turned on.
Open the disc tray.
Remote control sensor
Stop
Search
Slow-motion
• Up to 5 steps
• Press [q] (PLAY) to restart play.
MPEG4
Pause
• Press [q] (PLAY) to restart play.
Note
• DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [g]
when you finish to preserve the unit's motor and your television screen.
• To play or
MP3 JPEG
( page 18, "OTHERS" menu).
• Total title number may not be displayed properly on 4R/4RW.
If you are experiencing problems, refer to "Troubleshooting guide" ( page 20 to 22).
OPEN/CLOSE
Start play.
(during play)
(during pause)
VCD • Slow-motion: Forward direction only
Slow-motion: Does not work.
DivX
contents on DVD-RAM, set "DVD-VR/DATA" to "DATA"
9