Step 1 Connection - Panasonic DVD-S54 Operating Instructions Manual

STEP 1 Connection

Connection to a television

• Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
• Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
• Turn off all equipment before connection and read the appropriate operating instructions.
• Connect the terminals of the same colour.
With VIDEO IN or S VIDEO IN
A U D O I N I
R L
When using this connection, the audio cable

(red and white plugs) should also be connected.
You can connect the audio cable to the 2-channel
audio input terminals of an analog amplifier or
component receiver to enjoy stereo sound.
6
V D I E O S V D I E O
N I N I
S video cable

Audio/video cable
Audio/video
(included)
cable
(included)
To enjoy progressive video
• Connect to a progressive output compatible television.
•
Set "VIDEO OUT-SCART" to "VIDEO/YPbPr" for component
terminals. ( page 17, "VIDEO" menu).
• Set "VIDEO PRIORITY" to "OFF" ( page 18, "HDMI" menu).
• Set "VIDEO OUT (I/P)" to "PROGRESSIVE", then follow the
instructions on the menu screen ( page 17, "VIDEO" menu).
The United Kingdom and Republic of Ireland
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i . 60p
input terminals are progressive compatible.
Television
With COMPONENT VIDEO IN
A U D O I N I
R L
Not used
The United Kingdom and Republic of Ireland
Back of the unit
The United Kingdom and Republic of Ireland
With SCART (AV) IN
C O M P O N E N T
V D I E O N I
Video
21-pin SCART
cables
cable
• If the television is compatible with
S-video, set "VIDEO OUT-SCART" to
"S-VIDEO/YPbPr", or compatible with
RGB, select "RGB/NO OUTPUT"
for the AV terminals ( page 17,
"VIDEO" menu). Also, set "VIDEO
PRIORITY" to "OFF" ( page 18,
"HDMI" menu) when "RGB/NO
OUTPUT" is selected.
SCART (AV) IN
AV