Panasonic DVD-S54 Operating Instructions Manual page 21

Picture incorrect
Picture distorted. • Ensure that the unit is not connected through a video
cassette recorder. (6)
• Make sure that progressive output has not been selected
when the connected television is not progressive compatible.
Press and hold [RETURN] until the picture displays correctly.
The settings will return to "INTERLACE".
• DivX Change "SOURCE SELECT" in On-Screen Menu 2.
(15)
Picture size doesn't • Change "TV ASPECT" in "VIDEO" menu. (17)
fit the screen. • Use the television to change the aspect. If your television
does not have that function, change "TV ASPECT". (17)
Change the zoom setting. (14)
•
Picture stops. • Picture may stop if the DivX files are greater than 2GB.
The television may • The unit and television are using different video systems.
display incorrectly Asia Use a multi-system or NTSC television.
or colours appear Use a multi-system or PAL television.
Others
faded. • The system used on the disc doesn't match your television.
–PAL discs cannot be correctly viewed on an NTSC television.
–This unit can convert NTSC signals to PAL60 for viewing
on a PAL television ("NTSC DISC OUT" in "VIDEO" menu).
(17)
• Connect to a progressive output compatible television to
enjoy progressive video.
• Picture may not be seen when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
Menu not displayed • Restore the zoom ratio to "NORMAL". (14)
correctly. • Change "TV ASPECT" in "VIDEO" menu. (17)
Sound incorrect
Sound distorted. • Set Advanced surround to "OFF". (13)
• Noise may occur when playing WMA files.
• With HDMI AV OUT connections, audio may not be output
from other terminals in the way that was set.
No sound. • Turn the volume up.
• Audio may not be output due to how files were
DivX
created.
• Audio may not be heard when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
• When using the HDMI connection, ensure that "AUDIO OUT"
in the "HDMI" menu is set to "ON".
Piercing noise • If you have connected a digital amplifier which does not
comes from the
include decoder, be sure to select "PCM" in "DOLBY
speakers. DIGITAL", "DTS" or "MPEG
Effects do not work. • None of the audio effects work when the unit is outputting
bitstream signals from the COAXIAL or HDMI AV OUT
terminal. (7, 8)
• Some audio effects do not work or have less effect with
some discs.
• Advanced surround and Re-master do not work if you have
changed the play speed.
Recording
Cannot record to
• You cannot record WMA/MP3.
digital recording • You cannot record DVDs that have protection preventing
equipment.
digital recording.
(Incorrect sound • You cannot record DVDs if the recording equipment cannot
recorded.) handle signals with a sampling frequency of 48 kHz.
• Make the following settings:
– ADVANCED SURROUND:
– PCM OUTPUT:
– DOLBY DIGITAL:
– DTS:
2
Except Asia
" in "AUDIO" menu. (18)
2
OFF (13)
UP TO 48kHz (18)
PCM (18)
PCM (18)
21