Basic Play - Panasonic DVD-S42 Operating Instructions Manual

Basic play

1
Power ON.
3
Load the disc.
≥ Load double-sided discs so the label for the side you want
to play is facing up.
≥DVD-RAM: Remove discs from their cartridges before use.
Skip
≥ [DVD-VR] Can also skip to the markers.
Stop
The position is memorized when "!" flashes on the display.
≥ Press [1] (PLAY) to resume. (Resume play)
≥ Press [∫] to clear the position.
≥ Even after the unit is turned off, the position is memorized
(Normal playback only).
Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
8
2
Open the disc tray.
Remote control sensor
CM SKIP
TOP MENU MENU
PLAY LIST
DIRECT
NAVIGATOR
≥ To play [MP3], [JPEG], [MPEG4] or [DivX] contents on DVD-RAM that contain both [DVD-VR]
and another format (e.g. [JPEG]), select "Play as Data Disc" (➜ page 17, Other Menu).
≥ Discs continue to rotate while menus are displayed. Press [∫] when you finish to
preserve the unit's motor and your television screen.
≥ Total title number may not be displayed properly on iR/iRW.
If you are experiencing problems, refer to troubleshooting guide (➜ page 20, 21).
Stop Pause
4
Start play.
Repeat play
≥ Select "Repeat" (➜ page 11, Repeat play) or "A-B Repeat"
(➜ page 16, Play Menu).
Search
(during play)
Slow-motion
(during pause)
≥ Up to 5 steps
≥ Press [1] (PLAY) to restart play.
≥ [VCD] Slow-motion: forward direction only
≥ [MPEG4] [DivX] Slow-motion: Does not work.
Pause
≥ Press [1] (PLAY) to restart play.