Initial Setup For Basic Connections (Ready To Play) - Panasonic PV-D4763S-K Operating Instructions Manual

Initial Setup for Basic Connections (Ready to Play)

Before doing Initial Setup
1
Turn TV on.
2
a
See connections
<RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO.
3 [DECK ➛ ➛ ➛ ➛ ➛ TV]
• Go to "Initial Setup (Ready to Play)." (See below.)
[Cable Box ➛ ➛ ➛ ➛ ➛ DECK ➛ ➛ ➛ ➛ ➛ TV], [DSS ➛ ➛ ➛ ➛ ➛ DECK ➛ ➛ ➛ ➛ ➛ TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone.
• If you use a DSS Receiver, it must be turned off.
Initial Setup (Ready to Play)
1
Press VCR on remote for VCR mode.
2
Plug DECK Power Cord into AC wall outlet. DECK comes on and SELECT
LANGUAGE screen appears. When one of "1", "2", "3" keys is pressed, auto
channel and clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR's output channel, please refer to "VCR's Output Channel" on page 19.
• If wrong language is set, do "Reset All Memory Functions" (p. 9).
Plugging the AC Power Plug into an AC outlet
SELECT LANGUAGE
ENGL I SH
FRANÇA I S
ESPAÑOL
CH AUTO SET PROCEEDING
CANCEL : STOP
AUTO CLOCK SET
PROCEEDING
CANCEL : STOP
16
D4763S-K(E) P1-25 (030325 MP).p65
RF Coaxial Cable Connection and
Select language
Press 1 : English
:PRESS 1
Press 2 : French
:APPUYER 2
:OPR I M I R 3 Press 3 : Spanish
Notes
• Function buttons are inoperative during Initial Setup.
• To remove a cassette during Auto Set, press EJECT on
the remote or STOP/EJECT twice on the DECK.
In this case, settings must be made manually. (See p. 18.)
• Depending on conditions, Auto Clock Set may take longer
than 30 minutes. If so, press STOP to stop setup and
perform settings manually. (See p. 18.)
16
b
AV Cable Connection on page 12.
Continued on next page...
2003/04/10, 10:01