Power Off Link - Panasonic Viera TX-P42UT50E Operating Instructions Manual

Q-Link
Preparations
Connect the DVD Recorder / VCR with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC (a trademark of Metz Corporation)", "Easy Link (a trademark of Philips
Corporation)", "Megalogic (a trademark of Grundig Corporation)", "SMARTLINK (a trademark of Sony Corporation)"
Q-Link connection
Use fully wired SCART cable.
Set up the DVD Recorder / VCR. Read the manual of the recorder.
Q-Link terminal setup in the Setup Menu
Download preset - channel, language and country / region settings
Features available
Preset download
Channel, language and country settings can be downloaded to the recorder.
DVB-C channel settings cannot be downloaded.
To download settings
[Download] (p. 43), [Auto Setup] (p. 15, 16, 46)
Direct TV Recording
Records the current programme in DVD Recorder / VCR immediately.
Set the code of the remote control to "73" (p. 30).
Available conditions:
Analogue
DVB
AV (watching recorder's tuner)
AV (watching recorder's external input)
AV (watching TV's external input)
When Direct TV Recording is performed, the recorder is automatically turned on if it is in Standby mode.
You can change channel or turn the TV off while the recorder is recording from its own tuner.
Changing channel is not available while the recorder is recording from the TV tuner.
To stop recording
Unlock the tuner
Press EXIT to unlock and stop recording
Power on link and Easy playback
Set Power on Link [On] in the Setup Menu to use this function
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment are activated, the
TV is turned on and input mode is switched automatically so that you can view the content. (Only when the TV is in
Standby mode.)

Power off link

Set Power off Link [On] in the Setup Menu to use this function
When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the videocassette or
disc is not active.)
This function works even if the TV enters Standby mode automatically by auto power standby function.
Note
Some recorders are not applicable. Read the manual of the recorder.
82
(p. 80)
[AV1 out] (p. 42)
- What you see is What you record
Picture source
Tuner Locked
"Preset download" (see below)
Mode Recording from
TV TV monitor out
AV Recorder's tuner
TV TV monitor out
AV Recorder's tuner
AV Recorder's external input
AV TV monitor out
[Power on Link] (p. 42)
[Power off Link] (p. 42)