Panasonic Viera TX-P42UT50E Operating Instructions Manual page 35

3D Settings
If the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings.
To return to TV
Item
2D 3D Depth Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max]
Adjustment of the 3D effect (except in [2D 3D] mode) [Off] / [On]
Set to [On] to enable [Effect] setting.
3D Adjustment When setting to [On], a safety precaution message will appear. Read it carefully and press the
BACK/RETURN button to go to [Effect] setting.
[Effect]: Adjusts the 3D depth according to the contents or to your preference.
Picture
Select [Reverse] if you feel that the sense of depth is unusual (except in [2D 3D] mode)
Sequence [Normal] / [Reverse]
Set to [On] if you feel the contoured parts of an image are not smooth enough (except in [2D
Edge Smoother
3D] mode) [Off] / [On]
Automatically detects the 3D format signals [Off] / [On] / [On (Advance)]
[On (Advance)]: Detects all the 3D format signals and displays the 3D image automatically.
3D Detection [On]: Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3D
To view 3D images without any notifications and operations, set to [On (Advance)].
Selects whether to give a notification message when a signal of 3D format is found [Off] / [On]
3D Signal
For DVB, Component and HDMI input
Message
This function is not available when [3D Detection] is set to [On (Advance)].
Safety
Displays the precautions for viewing 3D images
Precautions
Note
[3D Adjustment] and [Picture Sequence] will not be memorised when changing the input mode or channel.
Display the menu
1
Select [Picture]
2
Picture
Select [3D Settings]
3
P-NR
3D Settings
Screen Display
Advanced Settings
Reset to Defaults
Select one of the following functions and set
4
3D Settings
2D 3D Depth Mid
3D Adjustment
Picture Sequence
Edge Smoother
3D Detection
3D Signal Message
Safety Precautions
Adjustments / Configurations (alternatives)
image automatically.
2/2
Off
Access
On
Access
Normal
Off
On
On
Access
select
access
select
access
select
adjust
access / store
35