Last View - Panasonic Viera TX-P42UT50E Operating Instructions Manual

Aspect
Change the aspect ratio (image size)
Enjoy viewing the image at its optimum size and aspect.
Programmes usually contain an "Aspect Control Signal" (Widescreen signal, etc.), and the TV will choose the
aspect ratio automatically according to the "Aspect Control Signal" (p. 90).
To change the aspect ratio manually
1
Display Aspect Selection list
Aspect Selection list
[Auto]
The best ratio is chosen and the image expanded to fill the screen.
For details
[16:9]
Directly displays the image at 16:9
without distortion (anamorphic).
[14:9]
Displays the image at the standard
14:9 without distortion.
[Just]
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
[4:3]
Displays the image at the standard 4:3
without distortion.
Note
Aspect cannot be changed in teletext service and 3D mode.
Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals.

Last view

Switch to previously viewed channel or input mode easily
Press again to return to the current view.
Note
Switching channel is not available while the recording of Timer Programming or Direct TV Recording is in progress.
Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
2
While the list is displayed,
select the mode
Aspect Selection
Auto
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
EXIT
Change
RETURN
(p. 90)
You can also change the mode only
select
using the ASPECT button.
store
[4:3 Full]
Displays a 4:3 image enlarged
horizontally to fit the screen.
[Zoom1]
Displays a 16:9 letterbox or 4:3 image
without distortion.
[Zoom2]
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
[Zoom3]
Displays a 2.35:1 letterbox (anamorphic)
image full-screen without distortion.
At 16:9, displays the image at its
maximum (with slight enlargement).
(Press repeatedly until you
reach the desired mode.)
23