Panasonic Viera TX-P42UT50E Operating Instructions Manual page 30

Operating the contents or equipment with the TV remote control
You can operate the contents in Media Player / media servers, recording functions or the connected equipment with
the below buttons of this TV remote control.
How to change the code
Each type of the Panasonic equipment has its own remote control code.
To use in some features of this TV, you have to select the code "73".
Change to the appropriate code according to the equipment or features below.
Press and hold
Enter the appropriate code,
see table below
DVD Recorder, DVD Player, Blu-ray Disc Player
DLNA features (p. 76) or Direct TV Recording (p. 82, 84)
Note
Confirm if the remote control works correctly after changing the code.
The codes may be reset to default values if batteries are replaced.
Some operations may not be possible on some equipment models.
30
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD / video content
Stop
Stop the operations
Rewind / Skip / Search
VCR:
Rewind, view the picture rapidly in reverse
DVD / video content:
Skip to the previous track, title or chapter
Press and hold to search backward
Fast-forward / Skip / Search
VCR:
Fast-forward, view the picture rapidly forward
DVD / video content:
Skip to the next track, title or chapter
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Channel Up / Down
Select channel
[Direct TV Rec] (p. 82, 84)
during the following operations
Type of the equipment, features
Player theatre, Blu-ray Disc theatre
VCR
Using in Media Player (p. 62),
Equipment using in VIERA Link (p. 85)
Press
Code
70 (default)
71
72
73