Panasonic Viera TX-P42UT50E Operating Instructions Manual page 79

Audio output settings (for video contents)
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
To confirm or change the current sound status
1
Display the menu and Select [Sound]
Menu Item
SPDIF Selection
VIERA Connect
You can access VIERA Connect and enjoy various network contents.
VIERA Connect requires a broadband internet connection. Dial-up internet connections cannot be used.
Ensure the network connections and network settings are completed.
"Network connections" (p. 71), "Network Setup" (p. 72 - 75)
For details about VIERA Connect operation
Setup menu (Items in [Setup] may change without notice.)
Customize HomeScreen
My Account
Lock
Restrictions
Beep
Notices
Note
Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not
updated, you will not be able to use VIERA Connect.
You can update the software later manually.
VIERA Connect home screen is subject to change without notice.
The services through VIERA Connect are operated by their respective service providers, and service may be
discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
Some content may be inappropriate for some viewers.
Some content may only be available for specific countries and may be presented in specific languages.
Depending on the connection environment, the internet connection may be slow or may not be successful.
During the operation, audio signal is output from AV1, DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals.
But no video signals are output. AV1 can output audio signal if [AV1 out] is set to [Monitor] in the Setup Menu (p. 42).
To use HDMI2 with ARC function, connect an amplifier that has ARC function (p. 81) and set to use theatre speakers
(p. 87).
You can restrict access to VIERA Connect.
Turn the TV off, and then on again when changing or reconnecting the network connection.
(p. 68)
2
Sound
select
access
Adjustments / Configurations (alternatives)
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
(p. 19)
Changes the position of each services on VIERA Connect home screen
Confirms or removes the account information of the TV you entered on VIERA
Connect
Sets to restrict access to some services
Sets to restrict reveal of the restricted services
Sets beep sound On or Off when operating VIERA Connect
Displays the information of VIERA Connect
[Software Update] in [Network] (p. 75)
[Child Lock] (p. 55)
Select [SPDIF Selection] and set
SPDIF Selection Auto
Reset to Defaults Reset
select
access / store
2/2
79