: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE HANSOL MULTITECH, INC. 7001, VILLAGE DRIVE, SUITE 255, BUENA PARK, CA. 90621, USA TEL : (714)562-5151 User’s Manual...
Introduction Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warning If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Canadian Notice This Class B digital apparatus meets all requirements of the Cannadian Interference Causing Equipment Regulations.
Introduction Safety information Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL listed personal computer with similar configuration. Before making the connection ensure that the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor current rating.
Installation Pin assignment table D-Sub Mini 15pin connector Pin No. 15 Pin D-Sub Macintosh Red Video Red Ground Green Video Red Video Blue Video H/V Sync Frame Ground Sense (0) Green Video Red Ground Green Ground Green Ground Sense (1) Blue Ground Blue Video Sync.
Page 6
Controls Contrast & Brightness Menu 31.5KHz 60Hz 31.5KHz 60Hz CONTRAST BRIGHTNESS EXIT : Exit the Brightness or Contrast menu. Cursor : Increase or decrease the Brightness Cursor : Increase or decrease the Contrast. Position Menu POSITION : Move the image vertically up or down. : Move the image horizontally left or right.
Controls OSD Position Menu POSITION : Moves the OSD Position vertically up or down. : Moves the OSD Position horizontally left or right. PRESS Color Adjust Controls Menu COLOR - TEMP USER USER 6500K 9300K EXIT : Exit to the main menu. Controls : Increase or decrease the Selected color adjustment.