Set the clock
1
Press and hold
menu.
2
Press
/
repeatedly until [CLOCK] is
displayed with time digits blinking.
3
Rotate
anti-clockwise to set the hour.
4
Rotate
clockwise to set the minute.
Tip
•
The system can automatically synchronize its clock
with an RDS station that transmits time signals (see
'Synchronize the system clock' on page 14).
Display the clock
Press and hold
/DISP until [CLOCK] and
the set clock are displayed.
•
To exit the clock display, press any button
or rotate
.
Select a source
Press AS/SOURCE repeatedly to select a
source.
[DAB/DAB+]: When a DAB radio receiver
•
is connected, you can select this source to
listen to DAB radio stations.
[RADIO]: Listen to FM/MW radio.
•
•
[FRONT USB]/[REAR USB]: When a USB
storage device or compatible iPod/iPhone
is connected and recognized, you can
select this source to play audio files that
are stored on it.
[SD/SDHC]: When an SD/SDHC card is
•
inserted and recognized, you can select this
source to play audio files that are stored
on it.
•
[AUX IN]: Listen to the audio that is
transferred through the AUDIO-IN socket.
to access the system
Select a listening zone
1
Press and hold
following options is displayed.
•
[ALL]: For all passengers
[FRONT-L]: For the front-left seat only
•
[FRONT-R]: For the front-right seat
•
only
[FRONT]: For front passengers only
•
2
Press
/
repeatedly to select a
listening zone.
Mute the button beep
The beep sound of buttons is enabled by
default.
1
Press and hold
menu.
2
Press
/
repeatedly until [BEEP ON]
or [BEEP OFF] is displayed.
•
[BEEP ON]: Enable the beep sound of
buttons.
[BEEP OFF]: Mute the beep sound of
•
buttons.
3
Rotate
to change the setting.
until one of the
to access the system
EN
11