Listen To Dab Radio Stations; Switch To Dab Mode; Scan For On-Air Stations; Program Radio Stations - Philips CE139DR User Manual

6 Listen to DAB
radio stations
Note
•
Make sure that the DAB radio receiver is securely
connected.
•
For optimal reception, securely connect a DAB radio
antenna to the DAB radio receiver and extend it.
•
Check with local retailer or go to www.WorldDAB.org
for applicable DAB radio frequencies in your area.

Switch to DAB mode

1
Press AS/SOURCE repeatedly to switch
the source to [DAB/DAB+].
2
Press / repeatedly to select a band:
DAB1, DAB2, or DAB3.

Scan for on-air stations

Note
•
The operation does not replace the stations that are
programmed in each band.
1
Press and hold
menu.
» [DAB SCAN] is displayed.
2
Press .
» [SCANNING] is displayed.
» The product starts scanning for on-air
DAB radio stations.
» The detected stations are saved in the
flash memory.
to access the system
Tune to a detected station
1
Press to exit the system menu.
2
Press again to access the list of detected
stations.
» is displayed.
3
/
Press
until the name of the target station is
displayed.
4
Press to start listening.

Program radio stations

You can assign a sequence number to a
detected station. Afterwards, you can quickly
tune to it by pressing the corresponding
numeric button on the main unit.
Note
•
Before the programming, make sure that the scanning
is complete.
•
You can store a maximum of six stations in each band.
Program stations automatically
1
Press and hold
menu.
» [DAB SCAN] is displayed.
2
repeatedly until [DAB
Press /
STORE] is displayed.
3
Press .
» [STORING] is displayed.
» The product starts programming DAB
radio stations automatically.
» Earlier programmed stations are
replaced with the latest ones.
» After the programming is complete,
the first programmed station is
broadcast.
repeatedly or rotate
to access the system
EN
15