Receive Traffic Announcement; Set Rds Clock; Play Audio Files; Play A Disc - Philips CEM5100/12 User Manual

Table of Contents

Advertisement

[REG
All stations can be tuned to
OFF]
automatically.
1
Press MENU.
2
repeatedly until [REG] is
Press
or
displayed.
3
Rotate
to select a setting.
Receive traffic announcement
The TA (Traffic Announcement) turns on
automatically when you start your car audio.
Note
If the current received TA signal remains weak for
over 120 seconds, the unit will activate TA Seek mode
automatically. The TA Seek will seek for other station
with good condition of TA signal.

Set RDS clock

You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1
Press and hold MENU.
2
Press
or
repeatedly until [CT] is
displayed.
3
Rotate
to select a setting:
[CT ON]: turn the RDS clock on. Time
shown on the unit synchronizes with
that on the RDS station.
[CT OFF]: turn the RDS clock off.
Tip
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.

7 Play audio files

Note
Ensure that the disc or device contains playable files.

Play a disc

Note
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
CD-Recordables (CD-R)
CD-Re-writables (CD-RW)
MP3 CDs
WMA CDs
Note
Ensure that the disc contains playable content.
Insert a CD with the printed side facing up.
» Play starts automatically.
To pause CD play, press
To resume CD play, press
To skip to the previous/next track, press
or
.
To search backward/forward rapidly within
the current track, press
seconds.
Remove the CD
To take out the CD, press on the front panel.
Tip
If the disc is blocked in the disc compartment, press and
hold
until the disc comes out.
.
again.
or
for 3
EN
17

Advertisement

Table of Contents
loading

Table of Contents