Hans Grohe Talis 06462XXX Installation Instructions Manual

Hans Grohe Talis 06462XXX Installation Instructions Manual

Single control kitchen faucet

Advertisement

Quick Links

Installation Instructions / Warranty
Talis
06462XXX

Advertisement

Table of Contents
loading

Summary of Contents for Hans Grohe Talis 06462XXX

  • Page 1 Installation Instructions / Warranty Talis 06462XXX...
  • Page 2: Product Specifications

    Talis Single Control Kitchen Faucet 06462XXX Product Specifications: Hole size in mounting surface Maximum mounting surface depth Flow rate Maximum incoming water pressure Recommended incoming water pressure Recommended incoming hot water temp M3 cartridge with high temperature limit stop *Some governing bodies require that the water heater be set to 120 codes when setting the temperature on the water heater.
  • Page 3: Install The Faucet

    Install baseplate 06329XXX, (optional - not included) Position the baseplate and gasket on the faucet deck. From under the sink, install the mounting flanges and tighten the mounting collars by hand. The baseplate can be used on a kitchen sink with fewer than three holes. Remove and disgard the threaded studs on the bottom of the baseplate.
  • Page 4: User Instructions

    Connect the supply hoses: use 3/8” compression fittings (not included) to connect the hot and cold supply hoses to the stops. Use two wrenches, as shown in the diagram, to prevent the hoses from twisting. Install the hose weight: proper po- sitioning of the hose weight insures that the hose will retract smoothly.
  • Page 5: Replacement Parts

    Replacement Parts Troubleshooting Problem too little water handle hard to turn faucet drips water on countertop at base of faucet water under sink handle nut cover cartridge handspray aerator handspray hose squeezing connection 96099000 mounting hardware 10 check valve 11 handle screw 12 supply hose 13 hose weight XXX = color code...
  • Page 6: Limited Lifetime Consumer Warranty

    Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is neces- sary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucets and showers:...
  • Page 7 warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: Conditions, malfunctions or damage not resulting from defects in material or workmanship. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no-rinse”...
  • Page 8 Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GA 30004 • • Tel. 770 360-9880 • Fax 770 360 9887 www.hansgrohe-USA.com...

Table of Contents