Philips HD4743 User Manual page 14

EnglisH
1
Problem
The keep-warm light
does not go on when
the cooking process is
finished.
LCD display is off
when rice cooker is
unplugged
LCD shows E0, E1, E2,
E3, E4
LCD shows E5
The rice is not cooked. Not enough water has
The timer light does
not go on when the
timer is set.
The rice is too hard or
too soft.
The rice is scorched.
The rice cooker does
not automatically
switch to keep-warm
mode.
Cause
The light is defective.
The battery has run
out.
Electronic parts
malfunction.
been added.
The cooking process
has not started.
The inner pot is not
properly in contact
with the heating
element.
The heating element is
damaged.
The light is defective.
Not enough or too
much water has been
added.
The incorrect menu
has been selected.
The rice has not been
rinsed well.
The temperature
control is defective.
Solution
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Press OFF button once. The appliance will
resume to normal.
Add water according to the scale on the inside
of the inner pot (see chapter 'Using the
appliance').
You have failed to press the COOKING TIME
button and the COOK/REHEAT button.
Make sure that there is no foreign residue on
the heating element.
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Add water according to the scale on the inside
of the inner pot (see chapter 'Using the
appliance').
See chapter 'Using the appliance'.
Rinse the rice until water runs clear.
Take the appliance to your Philips dealer or a
service centre authorised by Philips.