Selecting The Various Built-In Flash Modes - Pentax MZ-60 Operating Manual

Selecting the various built-in flash modes

At each depress of the flash
mode button, the flash mode
on the LCD panel changes as
shown in the chart.
Auto-popup
Red-eye reduction
MEMO
• The auto-popup flash mode can only be set when one of 6 picture
modes is selected.
• The built-in flash pops up automatically when
LCD panel. However, it discharges only when required. (Automatic flash
function)
• or can only be set when one of 6 picture modes is selected.
• The auto-popup function of the built-in flash does not work when the
AE lock function is in use.
• The automatic flash function can also be used with the external flash.
• Even if is displayed on the LCD panel, the built-in flash does not
pop up automatically when the external flash has been mounted either
with the power off or the external flash is not yet fully charged.
• If the red-eye reduction is used while the AF360 FGZ, etc. is set as a
slave unit, the pre-flash will trigger the slave unit to discharge. Do not
use red-eye reduction with slave unit.
Auto-popup Manual-popup
+ (See page 80)
Manual-popup Flash off
+ (See page 83)
Red eye reduction
(See page 78, 80)
is displayed on the
77