Pentax MZ-60 Operating Manual page 53

Quartz date
Hide thumbs Also See for MZ-60:
Table of Contents

Advertisement

2
Focus on the subject by depressing the shutter
button halfway down.
The focus is locked at the first picture and remains
locked until three pictures are taken.
3
Take three consecutive pictures, depress and hold
down the shutter release button.
MEMO
• If you take a finger off from the shutter release button during auto
bracketing, the auto bracketing mode will remain effective for about 20
seconds. After that, the auto bracketing exposure for the first bracketed
frame will take effect.
• Auto bracket does not work in the Bulb timer Mode.
• Only the amount of light of the flash can be changed continuously by
using the auto bracketing mode following completion of charging of the
built-in flash or external flash unit (TTL and P-TTL Auto only). However,
in case of an external flash unit, if three consecutive frames are taken
while depressing the shutter button, the second and third frame may be
taken prior to completion of charging. Always make sure to check
completion of charging for each time.
How to cancel
Auto bracket can be canceled if the power is turned OFF or any
other drive mode is set.
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents