Pentax MZ-60 Operating Manual page 67

4
Confirm the shutter speed
and aperture value on the
LCD panel.
• When the power is on, the shutter speed and aperture value
will be displayed on the LCD panel.
* Exposure Warning
If the subject is too bright or
too dark, the plus
minus indicator in the
viewfinder and the selected
aperture value on the LCD
panel would blink slowly as a
warning as shown. When the
subject is too bright, choose a faster shutter speed. If it is too
dark, choose a slower shutter speed. When the selected aperture
value stops blinking rapidly, you can take the picture. If both
selected shutter speed and aperture blink, it means that the
exposure is out of metering range, unable to obtain a correct
exposure even if the shutter speed is adjusted. Select a darker
subject if the subject is too bright. Use a flash if it is too dark.
or
65