Pentax MZ-60 Operating Manual page 33

4
Align the film leader with
film leader end mark
shown as illustrated.
Note
• Automatic film speed setting
When DX-coded film is used, the correct film speed is automatically set
for the camera. If you use a non-DX coded film, you can set the film
speed manually. See page 75.
5
Close the back cover and
turn the main switch ON.
The film will be advanced to first
frame automatically and the
exposure counter 1 and film
status information appear on the
LCD panel when film is loaded
properly.
MEMO Incorrect film loading
If the film is not loaded properly,
the back cover and load the film again.
as
will blink on the LCD panel. Open
31
1