Advertisement
Available languages
Available languages
PiCTURE IN PICTURE (PIP) OPERATION
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature.
A second video source (VCR,
camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
TERMINALS ON BACK OF PTV
(may vary)
=
:
=
INPUT
CABLE BOX
TO AUDIO
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note:
The remote control must be programmed with supplied codes to operate the VCR and
Cable Box. See Programming the Remote Control in the Remote Control! Quick
Reference Guide.
Procedure
Press the PIP button on the remote control to display the PIP frame.
Note: _ initially, the PIP picture is the same as the Main Picture.
To view a different picture in the PIP frame:
°
Press the TV/VIDEO button on the remote control to select the video PIP source.
°
Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
°
Choose channels for the P/P frame by pressing the CBL button on the remote
control and using the numeric keypad or CH up/down buttons.
°
Choose channels for the Main Picture by pressing the TV button on the remote
contro! and using the numeric keypad or CH up/down buttons.
\|7
SX
SWAP Button
oN
i~
The SWAP
button
switches
the PIP and Main
Picture source.
Press the RECALL
button for
onscreen PIP and Main Picture source status.
Advertisement
Chapters
