Table of Contents
Advertisement
The T9 method
A press on the [Menu/T9] key allows you to swap between T9 text entry and the Multitap method.
1
Press the key bearing the required letter once only (the requested character may not be dis-
played first).
2
The active word changes as you enter text. Enter all the word characters up to the end of the word.
3
If the right word is not displayed when all the characters have been entered, press
you get the required word.
4
If the requested word does not correspond to the one displayed, press the [Menu/T9] key to
swap to the Multi-tap mode and enter the correct letters.
5
Use the [Left] or [Right] arrow keys to move the cursor around the text to insert or delete
characters.
Tips and Operation:
KEY
ACTION
Short press: Swap between the Lower case and the next character toggle mode.
Long press: Swap between the Upper case, Lower case.
Swap between the Multitap/Multipress method and the T9 text input.
Clear or backspace
Short press: to enter a space.
Long press: to access special characters.
Another matching word
Smart punctuation
Short press: moves the cursor to the beginning
Long press: moves the cursor to beginning
To move the cursor to the beginning or end of the text.
Example To write card:
Press the [Menu/T9] key and select
Select SMS.
Select Write new .
Fill in the To field (see "Sending a new SMS message", page 28).
In the Text field, press on the [Menu/T9] key until
Options, then Input mode and choose T9.
Press
Press
Press
Press
If the displayed word is not the one you want, press
necessary to view Card.
To insert a text symbol such as :) or :-) or press
to change the symbol to :( or :-( etc.
Inserting special characters or text
You can insert special characters, pre-stored text models,... while using the edition mode.
Some of the elements listed below are examples and may vary according to the edition context.
To insert special characters:
1
2
or:
, A appears.
, Cc appears.
, Car appears.
, Case appears.
Select Options, then select Insert.
Select
Special characters.
Scroll up, down, left or right and press OK to select the required special
character.
or end
or end
.
Messages
two or three times. Press
Messages/Text editing
25-
until
of each word.
of the text.
is displayed, or select
as many times as
as many times as necessary
Advertisement
Table of Contents
