Table of Contents
Advertisement
Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog
RGB output connectors.
Important:
•
Make sure that the connected device is turned off before starting connection.
•
Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.
•
When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.
•
See the owner's guide of each device for details about its connections.
Projector + AV device
Important:
•
Match the colors of the video and audio plugs on the Audio cable with those of the terminals.
•
Speaker output is mono.
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fitting (Y, C
COMPUTER-IN terminal.
DVD player or HDTV decoder
Important:
•
The terminal's names Y, P
•
The terminal's names vary depending on the connected devices.
•
Image may not be projected correctly with some DVD players.
•
When connecting a HDTV decoder having RGB output terminals, set Signal Type to RGB in the Setting menu.
•
Speaker output is mono.
EN-10
VCR, etc.
Audio cable (option)
to audio output
, and P
are given as examples of when a HDTV decoder is connected.
B
R
VIDEO
(option)
AUDIO IN
to audio output (L)
to audio output (R)
to Video output
, C
). When connecting such DVD player with this projector, use the
B
R
COMPUTER IN
(option)
Advertisement
Table of Contents
