Table of Contents
Advertisement
Menu operation (continued)
Basic operation
Several settings can be adjusted using the menu.
Example : Brightness setting
1.
Press the MENU button.
2.
Press the
or
button to select Picture.
Menu Options
Set the following options provided in the respective menus.
1. Picture menu
Menu option
Brightness
0 - 100
Contrast
0 - 100
Color Setting
Color Temp 4 options
Keystone
-20 - +20
4:3
Aspect
16:9
PC
Movie
Image
Standard
User
White Intensity
0 - 10
Gamma
0 - 6
•
If the cable is pulled out from the projector when the menu is displayed, last memory will lose, and the setting value will disappear.
EN-16
Setting
Brighten or darken the image.
Set the difference between light and dark areas.
Adjust the color temperature. At higher temperature the screen looks
colder; at lower temperature, the screen looks warmer. If you select
"User", "Red", "Green" and "Blue" can be adjusted.
Correct the keystone distortion.
The input source will be scaled to fit the projection screen.
•
SXGA signal is supported.
The input source will be scaled to fit the width of the screen.
For PC presentation (The brightness is emphatic.)
For home theater.
For PC standard color.
Memorize user's settings.
Increase the brightness of white areas.
Effect the represent of dark scenery. With greater gamma value, dark
scenery will look brighter.
3.
Press the
button.
4.
Press the
or
5.
Press the
or
6.
Exit the menu by pressing the MENU button several times
Important:
•
When the button doesn't function, unplug the power cord from the
wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
•
After selecting the items marked with
ton.
Feature description
button to select Brightness.
button to adjust the brightness.
, press the ENTER but-
Advertisement
Table of Contents
