Table of Contents
Advertisement
7. Help
remaining toner to fall into the drum unit before
removing.
6
Turn the two levers (1) on the used toner cartridge
firmly, until the triangles (2) match.
1
7
Remove the used cartridge (1) from the drum unit
(2).
2
L The toner may stick to the cartridge and the drum
unit. Be careful when handling. See page 4 for
details.
L Do not drop the toner on the black drum surface
(3).
L Put the used toner cartridge into the protection
bag.
8
Insert the cleaner (1) fully into the groove (2) of the
drum unit and move it from side to side at least 3
times to clean the inside of the drum unit.
54
2
1
3
L Repeat for the other groove.
1
Note:
L Be sure to clean all the way to the edge of each
groove.
9
If you replace the drum unit at the same time,
remove the new drum unit from the protection bag.
Place the new toner cartridge (1) into the drum unit
(2) vertically.
10
Turn the lever (1) on each side of the toner cartridge
while pressing down firmly.
2
1
2
1
Advertisement
Table of Contents
