Table of Contents
Advertisement
6. Programmable Features
Feature/Code
Changing the silent fax
recognition ring setting
{#}{3}{0}
Receiving other size
documents
{#}{3}{7}
Changing the LCD display
contrast
{#}{3}{9}
Changing the fax activation
code
{#}{4}{1}
Setting the memory
reception alert
{#}{4}{4}
Setting friendly reception
{#}{4}{6}
42
Selection
To change the number of times the unit rings while in TEL/FAX mode.
{3} "3" (default)
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
Note:
L See page 34 for details.
To receive a fax document that is longer than your recording paper.
{1} "ON" (default): The unit will fit received documents onto your recording
paper.
{2} "OFF": The unit will print the original size.
{1} "NORMAL" (default): For normal contrast.
{2} "DARKER": Used when the display contrast is too light.
If you wish to use an extension telephone to receive faxes, activate this
feature and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{1} "ON" (default)
{2} "OFF"
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {1} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
To alert you with a beeping sound when a received fax document is stored
into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
{1} "ON" (default): You will be alerted to a reception problem by a beeping
sound.
{2} "OFF": Deactivates this feature.
To receive a fax automatically when you answer a call and hear a fax
calling tone (slow beep).
{1} "ON" (default): You do not have to press {START} for fax reception.
{2} "OFF": You have to press {START} for fax reception.
Advertisement
Table of Contents
